In earlier releases, u-boot-zynq-scr.bbappend and bootcmd files were available in
meta-user layers. In the 2022.1 release, they are removed from the meta-user layer
and moved to Yocto eSDKs at <plnx-proj-root>/components/yocto/layers/meta-xilinx/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-zynq-scr.
You can find these files on running the
buildtools-extended as an option in
petalinux-config. Enable this option to use gcc
and other binaries as part of the PetaLinux tool. If you are using the newer Yocto
version, Honister, to build the project, the gcc version should be higher than
version 6 which is not available by default in most of the supported operating
systems. Enable this option to unblock this issue.
AUTO-LOGIN option in PetaLinux tool is disable by default. User can enable
$ petalinux-config -c rootfs -→ Image Features -→ [ ]
auto-login if required and it will be deprecated in future releases
since Yocto upstream does not support this.
Linux Components Selection
Added Image selector menuconfig option. It is disabled by default.