The PS, PMC, and CPM modules are grouped together and configured using the Control, Interface, and Processing System (CIPS) IP core as shown in the following figure.
Note: The Versal ACAP includes multiple power domains. In the PS,
the RPU is in the in the low-power domain (LPD), and the APU is in the full-power domain
(FPD). There are two implementations of the CPM depending on the target device
capability: CPM4 that is compliant with the PCIe
Base Specification Revision 4.0 and CPM5 that is compliant with the PCIe Base Specification Revision 5.0. CPM4 is fully
powered by the PL domain while CPM5 is powered by its own dedicated supply (VCCINT_CPM)
as well as the PS LPD. For more information on the power domains, see the
Versal
ACAP Technical Reference Manual (AM011).
Figure 1. Device-Level Interconnect Architecture