IOBUFDS_DCIEN - 2022.1 English

Versal Architecture Prime Series Libraries Guide (UG1344)

Document ID
UG1344
Release Date
2022-04-20
Version
2022.1 English

Primitive: Differential Bidirectional Buffer With Input Buffer Disable and On-die Input Termination Disable

  • PRIMITIVE_GROUP: I/O
  • PRIMITIVE_SUBGROUP: BIDIR_BUFFER

Introduction

The IOBUFDS_DCIEN primitive is available in the XP I/O banks. It has an IBUFDISABLE port that can be used to disable the input buffer during periods that the buffer is not being used. The USE_IBUFDISABLE attribute must be set to TRUE and SIM_DEVICE to the appropriate value for this primitive to have the expected behavior that is specific to the architecture. The IOBUFDS_DCIEN primitive also has a DCITERMDISABLE port that can be used to manually disable the optional on-die receiver termination features (uncalibrated or DCI).

The IOBUFDS_DCIEN primitive can disable the input buffer and force the O output to the internal logic to a logic-Low when the IBUFDISABLE signal is asserted High and the output buffer is 3-stated (T = High). If the I/O is using an on-die receiver termination feature (uncalibrated or DCI), this primitive disables the termination legs whenever the DCITERMDISABLE signal is asserted High and the output buffer is 3-stated (T = High).

When the output buffer is 3-stated (T = High), the input buffer and any on-die receiver termination (uncalibrated or DCI) are controlled by IBUFDISABLE and DCITERMDISABLE, respectively. When the output buffer is not 3-stated (T = Low), the input buffer and any on-die receiver termination (uncalibrated or DCI) are disabled and force the O output (to the internal logic) to a logic-Low. These features can be combined to reduce power whenever the input is idle for a period of time.

I/O attributes that do not impact the logic function of the component, such as IOSTANDARD, DRIVE, and SLEW, should be supplied to the top-level port via an appropriate property. For details on applying such properties to the associated port, see the Vivado Design Suite Properties Reference Guide (UG912).

Port Descriptions

Port Direction Width Function
DCITERMDISABLE Input 1 Control to enable/disable DCI termination. This is generally used to reduce power in long periods of an idle state.
I Input 1 Input of OBUF. Connect to the logic driving the output port.
IBUFDISABLE Input 1 Disables input path through the buffer and forces to a logic Low. This feature is generally used to reduce power at times when the I/O is idle for a period of time.
IO Inout 1 Bidirectional diff_p port to be connected directly to top-level inout port.
IOB Inout 1 Bidirectional diff_n port to be connected directly to top-level inout port.
O Output 1 Output path of the buffer.
T Input 1 3-state enable input signifying whether the buffer acts as an input or output.

Design Entry Method

Instantiation Yes
Inference No
IP and IP Integrator Catalog No

VHDL Instantiation Template

Unless they already exist, copy the following two statements and paste them before the entity declaration.
Library UNISIM;
use UNISIM.vcomponents.all;

-- IOBUFDS_DCIEN: Differential Bidirectional Buffer With Input Buffer Disable and On-die Input Termination Disable
--                Versal Prime series
-- Xilinx HDL Language Template, version 2022.1

IOBUFDS_DCIEN_inst : IOBUFDS_DCIEN
generic map (
   SIM_DEVICE => "VERSAL_PRIME", -- Set the device version for simulation functionality (VERSAL_PRIME,
                                 -- VERSAL_PRIME_ES1)
   USE_IBUFDISABLE => "TRUE"     -- Enable/Disable the IBUFDISABLE pin (FALSE, TRUE, T_CONTROL)
)
port map (
   O => O,                           -- 1-bit output: Buffer output
   DCITERMDISABLE => DCITERMDISABLE, -- 1-bit input: DCI Termination Disable
   I => I,                           -- 1-bit input: Buffer input
   IBUFDISABLE => IBUFDISABLE,       -- 1-bit input: Buffer disable input, high=disable
   IO => IO,                         -- 1-bit inout: Diff_p inout (connect directly to top-level port)
   IOB => IOB,                       -- 1-bit inout: Diff_n inout (connect directly to top-level port)
   T => T                            -- 1-bit input: 3-state enable input
);

-- End of IOBUFDS_DCIEN_inst instantiation

Verilog Instantiation Template


// IOBUFDS_DCIEN: Differential Bidirectional Buffer With Input Buffer Disable and On-die Input Termination Disable
//                Versal Prime series
// Xilinx HDL Language Template, version 2022.1

IOBUFDS_DCIEN #(
   .SIM_DEVICE("VERSAL_PRIME"), // Set the device version for simulation functionality (VERSAL_PRIME,
                                // VERSAL_PRIME_ES1)
   .USE_IBUFDISABLE("TRUE")     // Enable/Disable the IBUFDISABLE pin (FALSE, TRUE, T_CONTROL)
)
IOBUFDS_DCIEN_inst (
   .O(O),                           // 1-bit output: Buffer output
   .DCITERMDISABLE(DCITERMDISABLE), // 1-bit input: DCI Termination Disable
   .I(I),                           // 1-bit input: Buffer input
   .IBUFDISABLE(IBUFDISABLE),       // 1-bit input: Buffer disable input, high=disable
   .IO(IO),                         // 1-bit inout: Diff_p inout (connect directly to top-level port)
   .IOB(IOB),                       // 1-bit inout: Diff_n inout (connect directly to top-level port)
   .T(T)                            // 1-bit input: 3-state enable input
);

// End of IOBUFDS_DCIEN_inst instantiation

Related Information

  • Versal ACAP SelectIO Resources Architecture Manual (AM010)