Mapping Kernel Ports to Memory - 2022.1 English

The link phase is when the memory ports of the kernels are connected to memory resources which include DDR, HBM, and PLRAM. By default, when the xclbin file is produced during the v++ linking process, all kernel memory interfaces are connected to the same global memory bank (or gmem). As a result, only one kernel interface can transfer data to/from the memory bank at one time, limiting the performance of the application due to memory access.

While the Vitis compiler can automatically connect CU to global memory resources, you can also manually specify which global memory bank each kernel argument (or interface) is connected to. Proper configuration of kernel to memory connectivity is important to maximize bandwidth, optimize data transfers, and improve overall performance. Even if there is only one compute unit in the device, mapping its input and output arguments to different global memory banks can improve performance by enabling simultaneous accesses to input and output data.

The following example is based on the Kernel Interfaces example code. Start by assigning the kernel arguments to separate bundles to increase the available interface ports, then assign the arguments to separate memory banks:

1. In C/C++ kernels, assign arguments to separate bundles in the kernel code prior to compiling them:

   void cnn( int *pixel, // Input pixel
     int *weights, // Input Weight Matrix
     int *out, // Output pixel
     ... // Other input or Output ports
   		   
   #pragma HLS INTERFACE m_axi port=pixel offset=slave bundle=gmem
   #pragma HLS INTERFACE m_axi port=weights offset=slave bundle=gmem1
   #pragma HLS INTERFACE m_axi port=out offset=slave bundle=gmem
   

   Note that the memory interface inputs pixel and weights are assigned different bundle names in the example above, while out is bundled with pixel. This creates two separate interface ports.

   Important: You must specify bundle= names using all lowercase characters to be able to assign it to a specific memory bank using the --connectivity.sp option.
2. Edit a config file to include the --connectivity.sp option, and specify it in the v++ command line with the --config option, as described in Vitis Compiler Command.
   For example, for the cnn kernel shown above, the connectivity.sp option in the config file would be as follows:

   [connectivity]
   #sp=<compute_unit_name>.<argument>:<bank name> 
   sp=cnn_1.pixel:DDR[0]          
   sp=cnn_1.weights:DDR[1]
   sp=cnn_1.out:DDR[2]
   

   Where:

   • <compute_unit_name> is an instance name of the CU as determined by the connectivity.nk option, described in Creating Multiple Instances of a Kernel, or is simply <kernel_name>_1 if multiple CUs are not specified.
   • <argument> is the name of the kernel argument. Alternatively, you can specify the name of the kernel interface as defined by the HLS INTERFACE pragma for C/C++ kernels, including m_axi_ and the bundle name. In the cnn kernel above, the ports would be m_axi_gmem and m_axi_gmem1.
     Tip: For RTL kernels, the interface is specified by the interface name defined in the kernel.xml file.
   • <bank_name> is denoted as DDR[0], DDR[1], DDR[2], and DDR[3] for a platform with four DDR banks. You can also specify the memory as a contiguous range of banks, such as DDR[0:2], in which case XRT will assign the memory bank at run time.

     Some platforms also provide support for PLRAM, HBM, HP or MIG memory, in which case you would use PLRAM[0], HBM[0], HP[0] or MIG[0]. You can use the platforminfo utility to get information on the global memory banks available in a specified platform. Refer to platforminfo Utility for more information.

     In platforms that include both DDR and HBM memory banks, kernels must use separate AXI interfaces to access the different memories. DDR and PLRAM access can be shared from a single port.

   • Important: Customized bank assignments might also need to be reflected in the host code in some cases, as described in Assigning DDR Bank in Host Code.

[connectivity]
## Syntax
##sp=<cu_name>.<interface_name>:HOST[0]
sp=cnn_1.m_axi_gmem:HOST[0]