Adding a Block to a Configurable Subsystem - 2022.1 English

Vitis Model Composer User Guide (UG1483)

Document ID
UG1483
Release Date
2022-05-26
Version
2022.1 English

To add an underlying block to a configurable Subsystem, do the following:

  1. Open and unlock the library for the Subsystem.
  2. Drag a block into the library.
  3. Double-click the template, and select the checkbox next to the added block.
    Figure 1. Add a Block
  4. Press OK, and then save the library.
  5. Compile the design by typing Ctrl-D.
  6. If necessary, update the choice for each instance of the configurable Subsystem.