SysgenBlockDescriptor Methods - 2022.1 English

Vitis Model Composer User Guide (UG1483)

Document ID
UG1483
Release Date
2022-05-26
Version
2022.1 English
Method Description
setTopLevelLanguage(language) Declares language for the top-level entity (or module) of the black box. The language should be VHDL or Verilog.
setEntityName(name) Sets name of the entity or module.
addSimulinkInport(pname) Adds an input port to the black box. pname defines the name the port should have.
addSimulinkOutport(pname) Adds an output port to the black box. pname defines the name the port should have.
setSimulinkPorts(in,out) Adds input and output ports to the black box. in (respectively, out) is a cell array whose element tell the names to use for the input (resp., output) ports.
addInoutport(pname) Adds a bidirectional port to the black box. pname defines the name the port should have. Bidirectional ports can only be added during the config_netlist_interface phase of configuration.
tagAsCombinational() Indicate that the block has a combinational path (i.e., direct feedthrough) from an input port to an output port.
addClkCEPair(clkPname, cePname, rate) Defines a clock/clock enable port pair for the block. clkPname and cePname tell the names for the clock and clock enable ports respectively. rate, a double, tells the rate at which the port pair runs. The rate must be a positive integer. Note the clock (respectively, clock enable) name must contain the substring clk (resp., ce). The names must be parallel in the sense that the clock enable name is obtained from the clock name by replacing clk with ce.
port(name) Returns the SysgenPortDescriptor that matches the specified name.
inport(indx) Returns the SysgenPortDescriptor that describes a given input port. indx tells the index of the port to look for, and should be between 1 and numInputPorts.
outport(indx) Returns the SysgenPortDescriptor that describes a given output port. indx tells the index of the port to look for, and should be between 1 and numOutputPorts.
addGeneric(identifier, value) Defines a generic (or parameter if using Verilog) for the block. identifier is a string that tells the name of the generic. value can be a double or a string. The type of the generic is inferred from value's type. If value is an integral double (e.g., 4.0), the type of the generic is set to integer. For a non-integral double, the type is set to real. When value is a string containing only zeros and ones (e.g., `0101'), the type is set to bit_vector. For any other string value, the type is set to string.
addGeneric(identifier, type, value) Explicitly specifies the name, type, and value for a generic (or parameter, if using Verilog) for the block. All three arguments are strings. identifier tells the name, type tells the type, and value tells the value.
addFile(fn) Adds a file name to the list of files associated to this black box, fn is the file name. Ordinarily, HDL files are associated to black boxes, but any sorts of files are acceptable. VHDL file names should end in .vhd; Verilog file names should end in .v. The order in which file names are added is preserved, and becomes the order in which HDL files are compiled. File names can be absolute or relative. Relative file names are interpreted with respect to the location of the .mdl or library .mdl for the design.
getDeviceFamilyName() Gets the name of the FPGA corresponding to the black box.
getConfigPhaseString Returns the current configuration phase as a string. A valid return string includes: config_interface, config_rate_and_type, config_post_rate_and_type, config_simulation, config_netlist_interface, and config_netlist.
setSimulatorCompilationScript(script) Overrides the default HDL co-simulation compilation script that the black box generates. script tells the name of the script to use. For example, this method can be used to short-circuit the compilation phase for repeated simulations where the HDL for the black box remains unchanged.
setError(message) Indicates that an error has occurred, and records the error message. message gives the error message.