Using a Configurable Subsystem - 2022.1 English

Vitis Model Composer User Guide (UG1483)

Document ID
UG1483
Release Date
2022-05-26
Version
2022.1 English

To use a configurable Subsystem in a design, do the following:

  1. As described above, create the library that defines the configurable Subsystem.
  2. Open the library.
  3. Drag a copy of the template block from the library to the appropriate part of the design. The copy becomes an instance of the configurable Subsystem.
    Figure 1. Configurable Subsystem
  4. Right-click the instance, and under Block Choice select the block that should be used as the underlying implementation for the instance.
    Figure 2. Block Choice