Get or set the current hardware ILA data
current_hw_ila_data [‑quiet] [‑verbose] [<hw_ila_data>]
Hardware ILA data.
|Ignore command errors
|Suspend message limits during command execution
|hardware ILA data
Set or return the current ILA debug core data object.
The ILA data object is created in the Vivado® logic analyzer using the
upload_hw_ila_data command, or the
read_hw_ila_data command. By default, the current hw_ila_data object is the latest one created by the Vivado logic analyzer. The
current_hw_ila_data command can be used to change that object.
The ILA debug core captures sample data in real-time as the hardware device runs, based on the event triggers or capture conditions defined on the hw_ila object. The hw_ila object triggers on the hw_device are armed by the
The ILA data object can be displayed in the waveform window of the Vivado tools logic analyzer using the
display_hw_ila_data command. You can also write the ILA data to disk with the
write_hw_ila_data command to save the ILA debug information for later user and analysis.
This command returns the captured hardware ILA debug core data as an object, or returns an error if it fails.
-quiet - (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
-verbose - (Optional) Temporarily override any message limits and return all messages from this command.
<hw_ila_data> - (Optional) Specify the hw_ila_data object to set as the current data object for programming and debug. The hw_ila_data object must be specified as an object as returned by the
get_hw_ila_datas command. If the hardware ILA data is not specified, the
current_hw_ila_data object will be returned.