Create external port for the corresponding interface pins. If a cell is specified, create external interface ports for all unconnected interface pins.
make_bd_intf_pins_external [‑quiet] [‑verbose] <objects>...
Pass if successful in creating at least one interface port.
|Ignore command errors
|Suspend message limits during command execution
|The interface pins/cells to be made external
Create an external interface port in the current block design and connect that to the selected block interface pin. If a bd_cell is specified as the argument, all unconnected block interface pins of that cell will be made external. The created external interface port will have the same properties as the selected block interface pin.
The selected block interface pin, if unconnected, will be connected to a new interface port at the top-most level of the block design.
This command returns TCL_OK if it is successful, or TCL_ERROR if it fails, unless
-quiet is specified.
-quiet - (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
-verbose - (Optional) Temporarily override any message limits and return all messages from this command.
<objects> - (Required) Specify either a list of block interface pin objects returned by
get_bd_intf_pins, or block design cell objects returned by
axi_gpio_0, and connect it to an external interface port:
make_bd_intf_pins_external [get_bd_intf_pins axi_gpio_0/S_AXI]
axi_gpio_0 and individually connect them to external interface ports:
make_bd_intf_pins_external [get_bd_cells axi_gpio_0]