Read hardware SIO scan data from a file. A hardware SIO scan object will be created if not provided.
read_hw_sio_scan [‑quiet] [‑verbose] <file> [<hw_sio_scan>]
Hardware SIO scan object.
|Ignore command errors
|Suspend message limits during command execution
|hardware SIO scan file name
|hardware SIO scan data object Default: None
Read a hardware SIO scan data file and create a hw_sio_scan object in the Hardware Manager feature of the Vivado® Design Suite.
The SIO scan data can be written to disk using the
write_hw_sio_scan command, after running the scan using the
run_hw_sio_scan command. This command reads that data file.
If no hw_sio_scan object is specified, a new hw_sio_scan object is created and is named sequentially following any existing hw_sio_scan objects. After being read from disk, the SIO scan data can be plotted and viewed in the Vivado serial I/O analyzer by using the
This command returns a hw_sio_scan object, or returns an error if it fails.
-quiet - (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
-verbose - (Optional) Temporarily override any message limits and return all messages from this command.
<file> - (Required) The name of SIO scan data file to read. If the file extension is not specified, the Vivado tool assumes an extension of .csv.
<hw_sio_scan> - (Optional) Specify an existing hw_sio_scan object to read the scan data file into. The hw_sio_scan object can be specified by name, or as an object returned by the
read_hw_sio_scan C:/Data/LoopBack1.csv SCAN_0