reset_msg_config - 2022.1 English

Vivado Design Suite Tcl Command Reference Guide (UG835)

Document ID
UG835
Release Date
2022-05-05
Version
2022.1 English

Resets or removes a message control rule previously defined by the set_msg_config command.

Syntax

reset_msg_config [‑string <args>] [‑id <arg>] [‑severity <arg>] [‑limit]
    [‑suppress] [‑count] [‑default_severity] [‑regexp] [‑quiet] [‑verbose]

Usage

Name Description
[-string] A qualifier, only a rule created with a matching string qualifier will be reset/removed Default: empty
[-id] A qualifier, only a rule created with a matching id qualifier will be reset/removed
[-severity] A qualifier, only a rule created with a matching severity qualifier will be reset/removed
[-limit] reset the limit values for message controls that match the given qualifiers for the current project
[-suppress] stop suppressing messages that match the given qualifiers for the current project
[-count] reset the count of messages for all message controls that match the given qualifiers for the current project. This will prevent messages from being suppressed by a -limit control until the message count once again exceeds the specified limit.
[-default_severity] reset the message severity of all messages controls for the current project that match the given qualifiers to their default value
[-regexp] The values used for -string are full regular expressions
[-quiet] Ignore command errors
[-verbose] Suspend message limits during command execution

Categories

Report

Description

This command restores the default settings of the message limits or severity for messages returned by the Vivado® tool, or can unsuppress previously suppressed messages, as configured by the set_msg_config command.

You can only perform one reset action for each reset_msg_config command. An error is returned if more than one action is attempted in a single reset_msg_config command.

Message qualifiers of string, ID, and severity are used to determine which messages are reset by the reset_msg_config command. Multiple qualifiers have an AND relationship; only the messages matching the qualifiers will be reset.
Note: You must supply at least one message qualifier to identify a message or group of messages to apply the command to, or an error is returned.

To report the current rule configurations for messages, use the get_msg_config command.

Arguments

-string <args> - (Optional) Apply the selected operation only to messages that contain the given list of strings. Strings must be enclosed in braces, and multiple strings can be specified separated by spaces:
{{Vivado} {Synthesis}} 
Note: Strings are case sensitive.
-id <arg> - (Optional) Reset messages matching the specified message ID. The message ID is included in all returned messages. For example, "Common 17-54" and "Netlist 29-28".
Note: A wildcard * indicates all message IDs should be reset.
-severity <arg> - Reset messages with the specified message severity. There are five message severities:
  • ERROR - An ERROR condition implies an issue has been encountered which will render design results unusable and cannot be resolved without user intervention.
  • {CRITICAL WARNING} - A CRITICAL WARNING message indicates that certain input/constraints will either not be applied or are outside the best practices for a FPGA family. User action is strongly recommended.
    Note: Since this is a two word value, it must be enclosed in {}.
  • WARNING - A WARNING message indicates that design results may be sub-optimal because constraints or specifications may not be applied as intended. User action may be taken or may be reserved.
  • INFO - An INFO message is the same as a STATUS message, but includes a severity and message ID tag. An INFO message includes a message ID to allow further investigation through answer records if needed.
  • STATUS - A STATUS message communicates general status of the process and feedback to the user regarding design processing. A STATUS message does not include a message ID.

-limit - (Optional) Reset the message limit for messages matching the string, ID, or severity qualifiers.

-suppress - (Optional) Reset, or unsuppress messages matching the string, ID, or severity qualifiers.

-count - (Optional) Reset the message count for messages matching the string, ID, or severity qualifiers.

-default_severity - (Optional) Restore the default message severity for messages matching the string, ID, or severity qualifiers.

-quiet - (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
Note: Any errors encountered on the command-line, while launching the command, will be returned. Only errors occurring inside the command will be trapped.
-verbose - (Optional) Temporarily override any message limits and return all messages from this command.
Note: Message limits can be defined with the set_msg_config command.

Examples

The following example changes the severity of the specified message ID to a Critical Warning, and then resets the message to its default severity:
set_msg_config -id "Common 17-81" -new_severity "CRITICAL WARNING"
reset_msg_config -id "Common 17-81" -default_severity
This example changes the severity of messages with the specified message ID, gets the current message configuration rules, and then shows two different command forms to reset the specific rule and restore the message:
set_msg_config -id "Common 17-361" -severity INFO -new_severity WARNING
get_msg_config -rules
---------------------
Message control rules currently in effect are:
Rule Name  Rule                                                  Current Message Count
1  set_msg_config -ruleid {1} -id {Common 17-361} -severity {INFO} -new_severity {WARNING} 0
---------------------
reset_msg_config -id "Common 17-361" -default_severity
reset_msg_config -ruleid {1}                     
Tip: In the preceding example, only one of the reset_msg_config commands is needed to reset the message.