Understanding Run Status - 2022.1 English

Vivado Design Suite User Guide: Using the Vivado IDE (UG893)

Document ID
UG893
Release Date
2022-04-27
Version
2022.1 English

As runs are created, or launched, the run status updates in the Design Runs window. The window displays the status and results of the design runs defined, and it also provides commands to modify, launch, and manage the design runs.

The Design Runs window icons indicates the run state as follows:

  • Reset and ready to run
  • Run queued
  • Currently running
  • Completed runs
  • Completed runs in which design files have changed
  • Completed runs that failed to meet timing
  • Runs with errors

Run information updates as the runs proceed. You can close the Vivado IDE without affecting in-progress runs. When you re-open a project, the Vivado IDE updates the run status to reflect the latest status, which displays in the Design Runs table. The columns used for tracking information are:

Name
Displays run name.
Constraints
Displays the constraint set used for the run.
Status
Indicates run status as not started, running, complete, or error.
WNS
Displays worst negative slack.
TNS
Displays total negative slack.
WHS
Displays worst hold slack.
THS
Displays total hold slack.
TPWS
Displays total pulse width negative slack.
Total Power
Displays total on-chip power.
Failed Routes
Displays the number of nets that failed to route, are partially routed, or have conflicts.
Methodology
Displays the total number of critical warnings and warnings present in the design.
RQA Score
Displays the RQA score for the design.
QoR Suggestions
Displays the number of suggestions generated for the design.
LUT
Displays the LUT utilization number or percentage.
FF
Displays the flip-flop utilization number or percentage.
BRAMs
Displays the block RAM utilization number or percentage.
URAM
Displays the URAM utilization number or percentage.
DSP
Displays the DSP utilization number or percentage.
Tip: By default, the Design Runs window shows utilization as a number. To show utilization as a percentage, click the Show Percentage toolbar button .
Start
Reports the start time for the run.
Elapsed
Reports the elapsed time for the run.
Strategy
Displays the strategy assigned to the run. Strategies with an asterisk (*) indicate that some command options for the strategy have been overridden.
Part
Indicates the target part selected for the run.
Description
Displays the description associated with the run. This description is set initially to a strategy description when that strategy is applied to the run. However, you can modify the description later in the Run Properties window.
Note: The table is updated dynamically as the run commands progress. Runs that are launched outside of the Vivado IDE using generated scripts cause the table to update upon invoking the software.