When opening an elaborated design, as discussed in Elaborating the RTL Design, there are two settings that can be enabled or disabled to change the elaboration of the RTL design, as shown in the following figure.
The Elaboration page allows you to set options for the elaborated netlist view. This view is available from the Flow Navigator in.
Link IP Module Options:
- Blackbox model (stub file): Treats all IP which were synthesized out-of-context as a black box.
- Netlist model: Uses the synthesized netlist for IP that were synthesized out-of-context.
- Load constraints: Applies all active constraints to the elaborated design (timing and physical).
The following Tcl commands can be defined on the source fileset to enable the RTL elaboration settings:
set_property elab_link_dcps true [current_fileset]
set_property elab_load_timing_constraints true [current_fileset]