Tcl Commands for Simulation - 2022.1 English

Vivado Design Suite User Guide : Designing with IP (UG896)

Document ID
UG896
Release Date
2022-05-19
Version
2022.1 English

To specify the simulator language, type the following command in the Tcl Console:

set_property SIMULATOR_LANGUAGE <language_option> [current_project]

The following table shows the simulation language properties, language, and simulation model where the property is applied.

Table 1. Simulator Language Property
Simulation Model Language Simulation Model
IP delivers VHDL and Verilog behavioral models Mixed Behavioral simulation model provided in the specified SIMULATOR_LANGUAGE.
Verilog Verilog behavioral model.
VHDL VHDL behavioral model.
IP delivers Verilog behavioral model only Mixed Verilog behavioral model.
Verilog Verilog behavioral model.
VHDL VHDL simulation netlist generated from the IP DCP.
IP delivers VHDL behavioral model only Mixed VHDL behavioral model.
Verilog Verilog simulation netlist generated from the IP DCP.
VHDL VHDL behavioral model.
IP deliver no behavioral models Mixed/Verilog/VHDL Structural simulation netlist generated from the DCP in the specified SIMULATOR_LANGUAGE.
Note: Where available, a Behavioral Simulation model always takes precedence over a Structural Simulation netlist. Vivado does not offer a choice of simulation model.
Note: The setting for the project property SIMULATOR_LANGUAGE is used to determine the simulation models delivered when the IP supports both Verilog and VHDL.