Minimum Input Set - 2022.1 English

Vivado Design Suite User Guide: Power Analysis and Optimization (UG907)

Document ID
Release Date
2022.1 English

Before performing power estimation:

  • Make sure the activity is defined for all clocks in your netlist.
  • If possible, specify the activity of all primary input ports in your design by using the Tcl commands or by reading a simulation output file. These port activity rates determine the internal logic activity rates. Therefore, if the tool’s default settings do not match your application, the internal logic activity may be inaccurate.
  • If known, specify the activity of any high fanout nets that you defined in your HDL code, such as global set, reset, and clock enable signals.

When reading the simulation result file, make sure the activity is representative of the worst case design functional activity (that is, the simulation result at which the maximum design code coverage is achieved). Using simulation results from basic and corner case tests can lead to inaccurate power estimations.