Introduction - 2022.1 English

Vivado Design Suite User Guide: Dynamic Function eXchange (UG909)

Document ID
UG909
Release Date
2022-06-07
Version
2022.1 English

Dynamic Function eXchange (DFX) allows for the reconfiguration of modules within an active design. This flow requires the implementation of multiple configurations, which ultimately results in full bitstreams for each configuration and partial bitstreams for each reconfigurable module (RM). The number of configurations required varies by the number of modules that need to be implemented. However, all configurations use the same top-level, or static, placement and routing results. These static results are exported from the initial configuration and imported by all subsequent configurations using checkpoints.

DFX is a comprehensive solution that is comprised of many parts. These elements include the Xilinx® silicon ability to be dynamically reconfigured, the Vivado® software flow for compiling designs from RTL to bitstream, and the complementary features such as IP. In this release, you will see a mix of DFX and Partial Reconfiguration (PR) terminology, with DFX representing the overall solution and PR representing a component technology piece of that solution.

Complementary documentation, such as application notes, white papers, and videos, will not be recaptured with DFX terminology, but all new documentation from 2020 on will show the DFX terms.

The content of this guide includes the following:

  • Description of Dynamic Function eXchange as implemented in the Vivado® Design Suite
  • Assumption of familiarity with FPGA design software, particularly Vivado Design Suite
  • Updates specific to the Vivado Design Suite Release 2022.1. This release supports Dynamic Function eXchange for the products listed below. For a complete list of supported devices, see List of Supported Devices.
    • 7 series Devices
      • Nearly all Virtex®-7, Kintex®-7, Artix®-7, and Zynq®-7000 SoC devices.
        Note: Spartan-7 devices, as well as Artix-7 A12T and 7A25T, are not supported.
    • UltraScale™ ™ Devices
      • Place and route, as well as bitstream generation is enabled for all production devices.
        Note: Expect memory usage to be higher for VU440 than all others (potentially exceeding 64 MB).
      • Bitstream generation is disabled by default for ES2 devices, but place and route can still be performed.
    • UltraScale+™ Devices
      • Place and route, as well as bitstream generation, is enabled for all production devices, from Artix UltraScale+ through Virtex UltraScale+. New Support in this release include Zynq UltraScale+ RFSoC DFE devices.
      • Place and route is enabled for many engineering silicon (ES1, ES2) versions of UltraScale+ devices. Bitstream generation is disabled by default for these devices.
    • Versal Devices
      • DFX support for Versal devices is production for multiplePrime, AI Core and AI Edge devices. See the device support table in the appendix for the complete list.
      • Versal Premium devices (VP1202, VP1502, VP1702 and VP1802) are available for ES1 silicon. All of these devices are limited early access with license-gated implementation and parameter-gated device image generation. Contact Xilinx support if access to any of these devices are needed.