Connecting the Boards and Cables - 2022.1 English

Vivado Design Suite Tutorial: Programming and Debugging (UG936)

Document ID
UG936
Release Date
2022-05-20
Version
2022.1 English
  1. Connect the Digilent cable from the Digilent cable connector to a USB port on your computer.
  2. Connect the two SMA cables (for lab 5 only) as follows:
    1. Connect one SMA cable from J19 (TXP) to J17 (RXP).
    2. Connect the other SMA cable from J20 (TXN) to J66 (RXN).

The relative locations of SMA cables on the board are shown in Setup Requirements.