The DRCs shown in the following table flag design and timing constraint combinations that increase the stress on implementation tools, leading to impossible or inconsistent timing closure. These DRCs usually point to missing clock domain crossing (CDC) constraints, inappropriate clock trees, or inconsistent timing exception coverage due to logic replication. They must be addressed with highest priority.
Important: Carefully verify timing checks with a severity of Critical Warning.
For more information on timing methodology checks, see this link in the Vivado Design Suite User Guide: Design Analysis and Closure Techniques (UG906).
|TIMING-6||Critical Warning||No common clock between related clocks|
|TIMING-7||Critical Warning||No common node between related clocks|
|TIMING-8||Critical Warning||No common period between related clocks|
|TIMING-14||Critical Warning||LUT on the clock tree|
|TIMING-15||Warning||Large hold violation on inter-clock path|
|TIMING-16||Warning||Large setup violation|
|TIMING-30||Warning||Sub-optimal master source pin selection for generated clock|
|TIMING-31||Critical Warning||Inappropriate multicycle path between phase shifted clocks|
|TIMING-32, TIMING-33, TIMING-34, TIMING-37, TIMING-38, TIMING-39||Warning||Non-recommended bus skew constraint|
|TIMING-36||Critical Warning||Missing master clock edge propagation for generated clock|
|TIMING-42||Warning||Clock propagation prevented by path segmentation|
|Warning||Unreasonable user intra and inter-clock uncertainty|
|TIMING-48||Advisory||Max Delay Datapath Only constraint on latch input|
|TIMING-49||Critical Warning||Unsafe enable or reset topology from parallel BUFGCE_DIV|
|TIMING-50||Warning||Unrealistic path requirement between same-level latches|
|TIMING-56||Warning||Missing logically or physically excluded clock groups constraint|
|XDCB-3||Warning||Same clock mentioned in multiple groups in the
|XDCH-1||Warning||Hold option missing in multicycle path constraint|
|XDCV-1||Warning||Incomplete constraint coverage due to missing original object used in replication|
|XDCV-2||Warning||Incomplete constraint coverage due to missing replicated objects|