IOBUFDS_INTERMDISABLE - 2022.1 English

Vivado Design Suite 7 Series FPGA and Zynq-7000 SoC Libraries Guide (UG953)

Document ID
UG953
Release Date
2022-04-20
Version
2022.1 English

Primitive: Bi-Directional Differential Buffer with Input Termination Disable and Input Disable

Introduction

This design element is a bidirectional differential I/O buffer used to connect internal logic to an external bidirectional pin. This element includes an uncalibrated input termination (INTERM) disable as well as an input path disable as additional power saving features when the I/O is either is an unused state or being used as an output for a sustained amount of time. This element may only be placed in High Range (HR) banks in 7 series devices.

Port Descriptions

Port Direction Width Function
IO In/out 1 Bi-directional p-side port connection. Connect directly to top-level port in the design.
IOB In/out 1 Bi-directional n-side port connection. Connect directly to top-level port in the design.
I Input 1 Buffer input representing the output path to the device.
IBUFDISABLE Input 1 Disables input path through the buffer and forces to a logic high when USE_IBUFDISABLE is set to "TRUE". If USE_IBUFDISABLE is set to "FALSE" this input is ignored and should be tied to ground. This feature is generally used to reduce power at times when the I/O is either idle or during sustained write (output) conditions.
INTERMDISABLE Input 1 Disables input termination. This feature is generally used to reduce power at times when the I/O is either idle or during sustained write (output) conditions.
T Input 1 Sets the I/O in a high impedance 3-state mode when the I/O is being used for a read (input) operation. The T pin also affects the IBUFDISABLE function when USE_IBUFDISABLE = "TRUE". The T pin also disables INTERM when in a write (output) mode.
O Output 1 Buffer output representing the input path to the device.

Design Entry Method

Instantiation Yes
Inference No
IP Catalog Yes
Macro support No

Available Attributes

Attribute Type Allowed Values Default Description
DIFF_TERM STRING "TRUE", "FALSE" "FALSE" Turns the built-in differential termination on (TRUE) or off (FALSE).
IBUF_LOW_PWR STRING "TRUE", "FALSE" "TRUE" Allows a trade off of lower power consumption vs. highest performance when referenced I/O standards are used.
IOSTANDARD STRING See Data Sheet "DEFAULT" Assigns an I/O standard to the element.
SLEW STRING "SLOW" or "FAST" "SLOW" Sets the output rise and fall time. See the Data Sheet for recommendations of the best setting for this attribute.
USE_IBUFDISABLE STRING "TRUE", "FALSE" "TRUE" Enables or disables the feature of IBUFDISABLE. Generally used when it is not desirable to have the T pin disable input path to allow a read during write operation.

VHDL Instantiation Template

Unless they already exist, copy the following two statements and paste them before the entity declaration.
Library UNISIM;
use UNISIM.vcomponents.all;

-- IOBUFDS_INTERMDISABLE: Differential Bi-directional Buffer with Input Termination
--                        and Input path enable/disable
--                        May only be placed in High Range (HR) Banks
--                        7 Series
-- Xilinx HDL Language Template, version 2022.1

IOBUFDS_INTERMDISABLE_inst : IOBUFDS_INTERMDISABLE
generic map (
   DIFF_TERM => "FALSE", -- Differential termination (TRUE/FALSE)
   IBUF_LOW_PWR => "TRUE", -- Low Power - TRUE, HIGH Performance = FALSE
   IOSTANDARD => "BLVDS_25", -- Specify the I/O standard
   SLEW => "SLOW",   -- Specify the output slew rate
   USE_IBUFDISABLE => "TRUE") -- Use IBUFDISABLE function "TRUE" or "FALSE"
port map (
   O => O,     -- Buffer output
   IO => IO,   -- Diff_p inout (connect directly to top-level port)
   IOB => IOB, -- Diff_n inout (connect directly to top-level port)
   DCITERMDISABLE => DCITERMDISABLE, -- DCI Termination enable input
   I => I,     -- Buffer input
   IBUFDISABLE => IBUFDISABLE, -- Input disable input, high=disable
   INTERMDISABLE => INTERMDISABLE, -- Input termination disable input
   T => T      -- 3-state enable input, high=input, low=output
);

-- End of IOBUFDS_INTERMDISABLE_inst instantiation

Verilog Instantiation Template


// IOBUFDS_INTERMDISABLE: Differential Bi-directional Buffer with Input Termination
//                        and Input path enable/disable
//                        May only be placed in High Range (HR) Banks
//                        7 Series
// Xilinx HDL Language Template, version 2022.1

IOBUFDS_INTERMDISABLE #(
   .DIFF_TERM("FALSE"),     // Differential Termination ("TRUE"/"FALSE")
   .IBUF_LOW_PWR("TRUE"),   // Low Power - "TRUE", High Performance = "FALSE"
   .IOSTANDARD("BLVDS_25"), // Specify the I/O standard
   .SLEW("SLOW"),           // Specify the output slew rate
   .USE_IBUFDISABLE("TRUE") // Use IBUFDISABLE function, "TRUE" or "FALSE"
) IOBUFDS_INTERMDISABLE_inst (
   .O(O),     // Buffer output
   .IO(IO),   // Diff_p inout (connect directly to top-level port)
   .IOB(IOB), // Diff_n inout (connect directly to top-level port)
   .I(I),     // Buffer input
   .IBUFDISABLE(IBUFDISABLE),     // Input disable input, high=disable
   .INTERMDISABLE(INTERMDISABLE), // Input termination disable input
   .T(T)      // 3-state enable input, high=input, low=output
);

// End of IOBUFDS_INTERMDISABLE_inst instantiation

Related Information

  • See the 7 Series FPGA SelectIO Resources User Guide (UG471).