次のようなデバイス動作条件をすべて指定します。
- 温度
- 周辺温度
- ヒートシンク
- 電圧
- VCCINT
- VCCAUX
- VCCO
- デバイス
- 温度グレード
- プロセス コーナー
次のコマンドを使用します。
-
report_operating_conditions
すべてまたは指定した動作条件設定をレポートします。次に例を示します。
report_operating_conditions # Reports all report_operating_conditions -voltage
-
set_operating_conditions
指定されている動作条件パラメーターを変更します。次に例を示します。
set_operating_conditions -process maximum -junction_temperature 50 set_operating_conditions -voltage {vccint 0.97 vccaux 1.71}
- reset_operating_conditions
指定されている動作条件パラメーターまたはすべてのパラメーターを、選択したデバイスのデフォルト値に戻します。次に例を示します。
reset_operating_conditions # Resets all reset_operating_conditions -voltage