Steps for Firmware Version Configuration - 2022.2 English

PetaLinux Tools Documentation: Reference Guide (UG1144)

Document ID
UG1144
Release Date
2022-10-19
Version
2022.2 English
  1. Change into the root directory of your PetaLinux project.
    $ cd <plnx-proj-root>
  2. Launch the top level system configuration menu.
    $ petalinux-config
  3. Select Firmware Version Configuration.
  4. Select Host Name, Product Name, Firmware Version as per the requirement to edit them.
  5. Exit the menu and select <Yes> when asked: Do you wish to save your new configuration?
  6. Once the target is booted, verify the host name in cat /etc/hostname, product name in cat /etc/petalinux/product, and the firmware version in cat /etc/petalinux/version.
Note: Do not use '_' in hostname, product name and Firmware version