Program Device - 2022.2 English

Vitis Unified Software Platform Documentation: Embedded Software Development (UG1400)

Document ID
UG1400
Release Date
2023-01-02
Version
2022.2 English

Program the FPGA with the bitstream.

Figure 1. Program Device

The following table lists the options available on the Program Device page:

Project
Select the system project you want to use.
Bitstream/PDI File
Specify the bitstream/PDI file
BMM File
Specify the BMM file.
Software Configuration
Specify the program that is initialized at the reset start address for each processor in the Block RAM.
Processor
Name of the processor in the system.
ELF file
Specify the ELF file to initialize.
Program
Click this button to program the FPGA.
Device
By default, the Vitis software platform can detect devices on the JTAG chain and select the device that matches the hardware information in bitstream.
BMM/MMI File
Only for MicroBlaze design. These files store the BRAM name and location information of MicroBlaze. They are generated by Vivado.