Specifying Non-Intrusive Profiler Configuration - 2022.2 English

Vitis Unified Software Platform Documentation: Embedded Software Development (UG1400)

Document ID
UG1400
Release Date
2023-01-02
Version
2022.2 English

To configure options for the Profiler, do the following:

  1. Launch the Vitis software platform.
  2. Create a new standalone application project or select an existing one.
  3. Select Run > Run Configuration.
  4. In the Run Configurations page, expand Launch on Hardware (Single Application Debug).
  5. Create a run configuration.
  6. Click the Application view.
  7. Click the Edit button to view and configure the Advanced Options.
  8. In the Profile Options area, select the Enable Profiling check box.
  9. Select Non-Intrusive.
  10. Specify the low address and the high address of the program range to be profiled. Alternatively, select the Program Start or the Program End check box to auto-calculate the low or high address from the program.
  11. Count Instructions to count the number of instructions executed. Alternatively, select Count Cycles to count the number of cycles elapsed.
  12. Select Cumulative Profiling to profile without clearing the profiling buffers from the last execution.
  13. Click OK to save the configurations.
  14. Click Run to profile the selected project.