Get a list of wires.
Syntax
get_wires [‑regexp] [‑nocase] [‑filter <arg>] [‑of_objects <args>]
[‑uphill] [‑downhill] [‑from <args>] [‑to <args>] [‑quiet] [‑verbose]
[<patterns>]Returns
Wires
Usage
| Name | Description |
|---|---|
[-regexp]
|
Patterns are full regular expressions |
[-nocase]
|
Perform case-insensitive matching. (valid only when -regexp specified) |
[-filter]
|
Filter list with expression |
[-of_objects]
|
Get the wires of these tiles, nodes, pips, or nets. |
[-uphill]
|
Get the wires uphill from the provided pip. |
[-downhill]
|
Get the wires downhill from the provided pip. |
[-from]
|
-from <pip/site pin> Return the ordered list of wires beginning at this pip or site pin. May be used in combination with uphill. Default is downhill. -all is implied. |
[-to]
|
-to <pip/site pin> Return the ordered list of wires ending at this wire or site pin. May be used in combination with uphill. Default is downhill. -all is implied. |
[-quiet]
|
Ignore command errors |
[-verbose]
|
Suspend message limits during command execution |
[<patterns>]
|
Match wires against patterns Default: * |
Description
Returns a list of wires in the design that match a specified search pattern in an open design.
The default command gets a list of all wires in the design.
Note: To improve memory and performance, the
get_* commands return a container list of a single type of objects (e.g. cells, nets, pins, or ports). You can add new objects to the list (using lappend for instance), but you can only add the same type of object that is currently in the list. Adding a different type of object, or string, to the list is not permitted and will result in a Tcl error.
Arguments
-regexp - (Optional) Specifies that the search <patterns> are written as regular expressions. Both search <patterns> and -filter expressions must be written as regular expressions when this argument is used. Xilinx® regular expression Tcl commands are always anchored to the start of the search string. You can add ".*" to the beginning or end of a search string to widen the search to include a substring. See http://perldoc.perl.org/perlre.html for help with regular expression syntax.
Note: The Tcl built-in command
regexp is not anchored, and works as a standard Tcl command. For more information refer to http://www.tcl.tk/man/tcl8.5/TclCmd/regexp.htm.
-nocase - (Optional) Perform case-insensitive matching when a pattern has been specified. This argument applies to the use of -regexp only.
-filter <args> - (Optional) Filter the results list with the specified expression. The -filter argument filters the list of objects returned by get_wires based on property values on the wires. You can find the properties on an object with the report_property or list_property commands. Any property/value pair can be used as a filter. In the case of the wire object, "NAME", "NUM_DOWNHILL_PIPS" and "NUM_UPHILL_PIPS" are some of the properties that can be used to filter results.
The filter search pattern should be quoted to avoid having to escape special
characters. String matching is case-sensitive and is always anchored to the start
and to the end of the search string. The wildcard “*” character can be used at the
beginning or at the end of a search string to widen the search to include a
substring of the property value.
Note: The filter returns an object if a specified
property exists on the object, and the specified pattern matches the property
value on the object. In the case of the "*" wildcard character, this will match
a property with a defined value of "".
For string comparison, the specific operators that can be used in filter expressions are "equal" (==), "not-equal" (!=), "match" (=~), and "not-match" (!~). Numeric comparison operators <, >, <=, and >= can also be used. Multiple filter expressions can be joined by AND and OR (&& and ||). The following gets input pins that do NOT contain the “RESET” substring within their name:
get_pins * -filter {DIRECTION == IN && NAME !~ "*RESET*"}
Boolean (
bool) type properties can be directly evaluated in filter expressions as true or not true: -filter {IS_PRIMITIVE && !IS_LOC_FIXED}
-of_objects <args> - (Optional) Return the wires of the specified nodes, PIPs, or tiles.
Note: The
-of_objects option requires objects to be specified using the get_* commands, such as get_cells or get_pins, rather than specifying objects by name. In addition, -of_objects cannot be used with a search <pattern>.
-quiet - (Optional) Execute the command quietly, returning no messages from the command. The command also returns TCL_OK regardless of any errors encountered during execution.
Note: Any errors encountered on the command-line, while launching the command, will be returned. Only errors occurring inside the command will be trapped.
-verbose - (Optional) Temporarily override any message limits and return all messages from this command.
Note: Message limits can be defined with the
set_msg_config command.<patterns> - (Optional) Return wires matching the specified search patterns. The default pattern is the wildcard '*' which gets a list of all wires in the design. More than one search pattern can be specified to find wires based on different search criteria.
Note: You must enclose multiple search patterns in braces, {}, or quotes, "", to present the list as a single element.
Examples
The following example returns the wires associated with the specified tile:
get_wires -of_objects [get_tiles IO_INT_INTERFACE_L_X0Y198]