Generating Additional Reports - 2022.2 English

Vivado Design Suite User Guide: Using the Vivado IDE (UG893)

Document ID
UG893
Release Date
2022-10-27
Version
2022.2 English

In addition to the reports generated during synthesis and implementation, you can generate custom reports on demand at different stages in the design flow. From the Flow Navigator or using the Reports menu command, you can generate the following reports.

Note: To identify common design issues, run Report Methodology the first time you synthesize the design. Run this report again when there is a change in constraints, clocking topologies, or large logic changes. For more information, see this link in the Vivado Design Suite User Guide: System-Level Design Entry (UG895).
  • Report IP Status
  • I/O
    • Report Noise
    • Report I/O
  • Timing
    • Report Timing Summary
    • Report Bus Skew
    • Report Timing
    • Check Timing
    • Config Timing
    • Create Slack Histogram
    • Report Clock Interaction
    • Report CDC
    • Report Exceptions
    • Report Clock Networks
    • Report Pulse Width
    • Report Datasheet
  • Report Methodology
  • Report DRC
  • Report QoR Suggestion
  • Report QoR Assesment
  • Report Utilization
  • Report Clock Utilization
  • Report Power
  • Report Power Optimization
  • Report High Fanout Nets
  • Report Design Analysis
Tip: If multiple timing reports are open, you can tile the reports horizontally or vertically. Right-click a report tab, and select New Horizontal Group or New Vertical Group.

For more information on these reports, see the following documents:

  • Vivado Design Suite User Guide: Power Analysis and Optimization (UG907)
  • Vivado Design Suite User Guide: I/O and Clock Planning (UG899)
  • Vivado Design Suite User Guide: Design Analysis and Closure Techniques (UG906)
  • Vivado Design Suite User Guide: Designing with IP (UG896)