Creating I/O Port Interfaces - 2022.2 English

Vivado Design Suite User Guide: I/O and Clock Planning (UG899)

Document ID
UG899
Release Date
2022-10-19
Version
2022.2 English
To group multiple ports or buses together, you can create an interface. This aids in pin assignment by treating all of the interface ports as one group. Assigning all of the pins simultaneously helps condense and isolate the interface for clock region or PCB routing. This also makes it easier to visualize and manage the signals associated with a particular logic interface.

To create an interface:

  1. In the I/O Ports window, select the signals to group together.
  2. Right-click, and select Create I/O Port Interface.
  3. In the Create I/O Port Interface dialog box (see the following figure), enter a name for the interface, adjust assignment selection, and click OK.

    The interfaces appear as expandable folders in the I/O Ports window as shown in the following figure.



    Tip: To delete interfaces, select an interface, right-click, and select Delete, or press the Delete key.