Adding Probes to the Waveform - 2022.2 English

Vivado Design Suite User Guide: Programming and Debugging (UG908)

Document ID
UG908
Release Date
2022-10-19
Version
2022.2 English

To add probes to the waveform, select the Probes to add for the associated ILA core in the Debug Probes window, right-click, and select Add Probes to Waveform from the popup menu.

To add another copy of a signal or bus to the Waveform window, select the signal or bus in the Waveform window. Then select Edit > Copy or type Ctrl+C. This copies the object to the clipboard. Select Edit > Paste or type Ctrl+V to paste a copy of the object in the waveform.

You can do the same using the Tcl command add_wave as shown below.

add_wave -into {hw_ila_data_1.wcfg} -radix hex { {counter1} }

In this example, probe counter1 is added to the Waveform Configuration window of hw_ila_1 and its display radix in the Waveform window is set to hex.