Clearing the AES Key for UltraScale and UltraScale+ Devices - 2022.2 English

Vivado Design Suite User Guide: Programming and Debugging (UG908)

Document ID
UG908
Release Date
2022-10-19
Version
2022.2 English

To clear the AES key manually, disconnect the Vbatt pins and power-cycle the board.

Note: Pressing or pulsing the PROG pin when the board/FPGA is powered up will not clear the BBR register.

Alternatively, you can clear the AES key in Vivado IDE by right-clicking the FPGA device in the Hardware window, selecting Clear BBR Key….

Figure 1. Clearing the AES Key for UltraScale and UltraScale+ Devices

When the Clear BBR Key dialog box appears, click OK to clear the key from the device.

Figure 2. Clear BBR Key Dialog Box