Use the write_cfgmem Tcl command to create the .mcs or .bin programming file. This file will be used in programming the configuration memory device.
For example, to generate an .mcs file to configure an FPGA with a single 1 Gbit BPI configuration memory device:
write_cfgmem -format mcs -interface bpix16 -size 128 \ -loadbit "up 0x0 design.bit"-file design.mcs
write_cfgmemin the example above. Note that
write_cfgmemautomatically sizes the configuration memory file to the size of the bitstream.
Vivado IDE supports the ability to chain
multiple .bit files together using the
write_cfgmem command. To generate an .mcs file for a single 1 Gbit BPI configuration memory
device containing multiple bitstreams:
write_cfgmem -format mcs -interface bpix16 -size 128 \ -loadbit "up 0 design1.bit up 0xFFFFF design2.bit" \ -file design1_design2.mcs
You can also create the Configuration Memory file in Vivado IDE. Click on . This will bring up the Write Memory Configuration File dialog box as following:
Select the relevant format and options, and click OK to generate the configuration memory file.