Instantiating the IP and integrating In-System IBERT IP in the User Design - 2022.2 English

Vivado Design Suite User Guide: Programming and Debugging (UG908)

Document ID
UG908
Release Date
2022-10-19
Version
2022.2 English

After generating the In-System IBERT IP core do the following:

  1. Open your top level RTL file to edit and add the In-System IBERT core generated in the above step.
  2. Copy the instantiation template of the In-System IBERT core generated by the tool and instantiate it in the RTL file.
  3. Connect the ports of your transceiver to the In-System IBERT IP.

For a detailed example of how to integrate In-System IBERT into the user design, see Chapter 5 "Example Designs" of the following IP Document: In-System IBERT LogiCORE IP Product Guide (PG246).

Tip: Ensure that you have read the FAQ section of the In-System IBERT LogiCORE IP Product Guide (PG246), which lists some recommendations for issues you could encounter while integrating this IP into your design.

4. Synthesize and implement the design.