Configuring the Device with a Full Image - 2022.2 English

Vivado Design Suite Tutorial: Dynamic Function eXchange (UG947)
Document ID
UG947
Version
2022.2 English
  1. Connect the board to your computer using the Platform Cable USB and power on the board.
  2. From the main Vivado IDE, select Flow > Open Hardware Manager.
  3. Select Open target on the green banner. Follow the steps in the wizard to establish communication with the board.
  4. Right-click the Xilinx device (e.g., xcku040_0) and select Program Device.
  5. Navigate to the Bitstreams folder to select top_shift_right_right.bit, then click Program to program the device.

You should now see the bank of GPIO LEDs performing two identical tasks: two sets of four LEDs are shifting to the right. Note the amount of time it took to configure the full device.

The currently operating device contains top (static), first-order RM reconfig_shifters, and second-order RMs shift_right (upper) and shift_right (lower).