Step 10: Generating Bitstreams - 2022.2 English

Vivado Design Suite Tutorial: Dynamic Function eXchange (UG947)

Document ID
UG947
Version
2022.2 English

At this point, there are two steps remaining: the first is running PR Verify to compare the two configurations to ensure consistency of the static part of the design images. This step is highly recommended and will occur automatically within the Vivado project. The second step is to generate the bitstreams themselves.

  1. In the Flow Navigator, click Generate Bitstream. This action launches bitstream generation on the active parent run, and launches PR Verify and then bitstream generation on the implemented child runs.
  2. This generates full and partial bitstreams for each configuration run.
  3. When bitstream generation completes, select Open Hardware Manager.