Tcl Command for Adding Existing Block Design Sources - 2023.1 English

Vivado Design Suite User Guide: System-Level Design Entry (UG895)

Document ID
UG895
Release Date
2023-05-16
Version
2023.1 English

Following is the associated Tcl command:

  • Tcl Command: report_ip_status
  • Tcl Command Example: report_ip_status -name ip_status
    Figure 1. Report IP Status

    Important: Locked IP are reported with the following critical warning message when you try to generate the output products for the block design: [BD 41-1336] One or more IPs are locked in this block design. Run report_ip_status for more details and recommendations on how to fix this issue.
    1. To unlock the IP and the block design, right-click the block design in the IP Sources tab of the Sources window and select the Report IP Status command.

      The IP Status report will show the IP part changes needed to unlock the block design.

    2. In the IP Status report window, select the Upgrade Selected command to upgrade the IP used in the block design to target the new part used in the current project.

      With the block design added to the current project, you must generate the output products required by the Vivado Design Suite to support the block design throughout the design flow.