Next, generate a clock
source for the NoC module. To do this, you will configure and generate the
Simulation Clock and Reset Generator IP core.
- Click Add IP, and
search for
Simulation Clock and Reset Generator
. - From the filtered list, double-click the Simulation Clock and Reset Generator IP core
to instantiate the IP on the block design canvas.
Configure the core as follows:
- For Number of SYS clocks, select 1.
- For Sys Clock 0 Frequency (MHz), enter 200.
- For Number of AXI Clocks, select 0.
- For Number of Resets Ports, select 0.
- Click OK to generate IP.