I/O Peripheral and Flash Memory Controllers - 3.0 English

Control Interfaces and Processing System LogiCORE IP Product Guide (PG352)

Document ID
PG352
Release Date
2021-06-16
Version
3.0 English

The I/O Peripheral and Flash Memory Controllers include the following.

  • Quad Serial Peripheral Interface (QSPI) flash memory
  • Octal Serial Peripheral Interface (OSPI) flash memory
  • UART
  • I2C
  • Serial Peripheral Interface (SPI) flash memory
  • SD/eMMC
  • General purpose I/O (GPIO)
  • Controller Area Network Flexible Data rates (CAN-FD)
  • USB 2.0
  • Gigabit Ethernet MAC (GEM)
    Note: The interfaces for these I/O peripherals (IOPs) can be routed to MIO ports and the extended multiplexed I/O (EMIO) interfaces as described in the Versal ACAP Technical Reference Manual (AM011).
  • PMC domain peripheral
    • QSPI
    • OSPI
    • 2xSD/eMMC
    • I2C
    • SelectMAP (SMAP)
    • GPIOs
  • Low power domain (LPD) peripherals available in PS:
    • 2 X Gigabit Ethernet
    • 1 X USB 2.0
    • 2 X SPI
    • 2 X CAN
    • 2 X I2C
    • 2 X UART
    • GPIOs