Tested Video Resolutions for RGB 4:4:4 and YCbCr 4:4:4 - 3.1 English

HDMI 1.4/2.0 Receiver Subsystem Product Guide (PG236)

Document ID
PG236
Release Date
2020-12-11
Version
3.1 English
Table 1. Tested Video Resolutions for RGB 4:4:4 and YCbCr 4:4:4
Resolution Horizontal Vertical Frame Rate (Hz)
Total Active Total Active
480i60 1 858 (1716) 720 (1440) 525 480 60
576i50 1 864 (1728) 720 (1440) 625 576 50
1080i50 2640 1920 1125 1080 50
1080i60 2200 1920 1125 1080 60
480p60 858 720 525 480 60
576p50 864 720 625 576 50
720p50 1980 1280 750 720 50
720p60 1650 1280 750 720 60
1080p24 2750 1920 1125 1080 24
1080p25 2640 1920 1125 1080 25
1080p30 2200 1920 1125 1080 30
1080p50 2640 1920 1125 1080 50
1080p60 2200 1920 1125 1080 60
1080p120 2200 1920 1125 1080 120
2160p24 5500 3840 2250 2160 24
2160p25 5280 3840 2250 2160 25
2160p30 4400 3840 2250 2160 30
2160p60 4 4400 3840 2250 2160 60
4096x2160p60 4 4400 4096 2250 2160 60
vgap60 800 640 525 480 60
svgap60 1056 800 628 600 60
xgap60 1344 1024 806 768 60
sxgap60 1688 1280 1066 1024 60
wxgap60 1440 1280 790 768 60
wxga+p60 1792 1366 798 768 60
uxgap60 2160 1600 1250 1200 60
wuxgap60 2592 1920 1245 1200 60
wsxgap60 2240 1680 1089 1050 60
  1. Pixel repetition is enabled for 480i60 and 576i50. Therefore, the actual horizontal pixels are double the actual resolution.
  2. Not all resolutions can be supported due to VPHY limitation. For details, see the Video PHY Controller LogiCORE IP Product Guide (PG230) / HDMI GT Controller LogiCORE IP Product Guide (PG334) .
  3. In this release, UXGA 60 Hz is supported in the HDMI 1.4/2.0 RX Subsystem for 8, 10, and 12 bits per component only.
  4. For 4kp60 YUV444/RGB video, only 8-bits is supported as defined by HDMI 2.0 spec due to bandwidth limitation.