Changes from v1.0 to v1.1 - 3.2 English

Ports Added

The following ports have been added.

• ctl_gt_reset_all_*
• ctl_gt_reset_*
• ctl_gt_rx_reset_*
• gt_reset_all_in_*
• gt_tx_reset_in_*
• gt_rx_reset_in_*
• ctl_an_fec_25g_rs_request
• ctl_an_fec_25g_baser_request
• stat_an_lp_fec_25g_rs_request
• stat_an_lp_fec_25g_baser_request
• tx_ptp_rxtstamp_in
• rx_ptp_pcslane_out_*
• ctl_an_fec_25g_baser_request_*

Ports Removed

stat_tx_underflow_err

Port Changes

• rx_serdes_reset_done_in_* to rx_serdes_reset_*.
• SERDES_WIDTH with 64 for several I/O ports.
• ctl_an_ability_25gbase_cr to ctl_an_ability_25gbase_krcr
• ctl_an_ability_25gbase_kr to ctl_an_ability_25gbase_krcr_s
• ctl_an_fec_request to ctl_an_fec_10g_request. Updated description.
• stat_rx_errored_block_increment_valid to stat_rx_bad_code_valid
• stat_rx_bad_sh_increment_0[3:0] to stat_rx_framing_err_0[3:0]
• stat_rx_bad_sh_increment_1[3:0] to stat_rx_framing_err_1[3:0]
• stat_rx_bad_sh_increment_2[3:0] to stat_rx_framing_err_2[3:0]
• stat_rx_bad_sh_increment_3[3:0] to stat_rx_framing_err_3[3:0]
• stat_rx_bad_sh_increment_valid_1 to stat_rx_valid_1
• stat_rx_bad_sh_increment_valid_2 to stat_rx_valid_2
• stat_rx_bad_sh_increment_valid_3 to stat_rx_valid_3
• rx_axis_tuser_0 to rx_axis_tuser_*

Hex Addresses Added

• CONFIGURATION_LT_SEED_REG1: 0114
• CONFIGURATION_LT_COEFFICIENT_REG1: 0134
• STAT_LT_COEFFICIENT1_REG: 0478
• STAT_RX_ERROR_LSB: 0668
• STAT_RX_ERROR_LSB: 066C

Signals Added to Register Definitions

• ctl_gt_rx_reset
• ctl_gt_tx_reset
• ctl_tx_ipg_value
• ctl_tx_custom_preamble_enable
• ctl_rx_custom_preamble_enable
• ctl_an_fec_25g_rs_request
• ctl_an_fec_25g_baser_request
• stat_an_lp_fec_25g_rs_request
• stat_an_lp_fec_25g_baser_request

Register Tables Added

• CONFIGURATION_LT_SEED_REG1: 0114
• CONFIGURATION_LT_COEFFICIENT_REG1: 0134
• STAT_LT_COEFFICIENT1_REG: 0478
• STAT_RX_ERROR_LSB: 0668
• STAT_RX_ERROR_MSB: 066C