Changes from v2.0 (10/05/2016) to v2.0 (11/30/2016) version - 3.3 English

10G/25G High Speed Ethernet Subsystem Product Guide (PG210)

Document ID
PG210
Release Date
2020-12-16
Version
3.3 English

Ports Added

  • gtwiz_reset_qpll1lock_in
  • gtwiz_reset_qpll1reset_out
  • gt_refclk_out
  • tx_unfout_*
  • stat_rx_valid_ctrl_code_*
  • ctl_tx_ptp_1step_enable_*
  • ctl_tx_ptp_latency_adjust_*
  • ctl_ptp_transpclk_mode_*
  • tx_ptp_upd_chksum_in_*
  • tx_ptp_tstamp_offset_in_*
  • tx_ptp_chksum_offset_in_*
  • tx_ptp_rxtstamp_in_*
  • ctl_an_fec_25g_baser_request_*
  • stat_an_lp_ability_25gbase_cr1_*
  • stat_an_rxcdrhold_*
  • ctl_fec_enable_error_to_pcs_*
  • ctl_rx_rsfec_enable_correction_*
  • ctl_rx_rsfec_enable_indication_*
  • ctl_rsfec_enable_*
  • ctl_rsfec_ieee_error_indication_mode_*
  • ctl_rsfec_consortium_25g_*
  • stat_rx_rsfec_hi_ser_*
  • stat_rx_rsfec_lane_alignment_status_*
  • stat_rx_rsfec_corrected_cw_inc_*
  • stat_rx_rsfec_uncorrected_cw_inc_*
  • stat_rx_rsfec_err_count0_inc_*
  • stat_tx_rsfec_lane_alignment_status_*
  • gt_drp_done_*
  • speed_*
  • anlt_done_*

Ports Removed

  • stat_rx_framing_err_valid_1_*
  • stat_rx_framing_err_1_*
  • stat_rx_framing_err_valid_2_*
  • stat_rx_framing_err_2_*
  • stat_rx_framing_err_valid_3_*
  • stat_rx_framing_err_3_*
  • stat_rx_vl_demuxed_*
  • stat_rx_vl_number_0_*
  • stat_rx_vl_number_1_*
  • stat_rx_vl_number_2_*
  • stat_rx_vl_number_3_*
  • stat_rx_synced_*
  • stat_rx_synced_err_*
  • stat_rx_mf_len_err_*
  • stat_rx_mf_repeat_err_*
  • stat_rx_mf_err_*
  • stat_rx_misaligned_*
  • stat_rx_aligned_err_*
  • stat_rx_bip_err_0_*
  • stat_rx_bip_err_1_*
  • stat_rx_bip_err_2_*
  • stat_rx_bip_err_3_*
  • stat_rx_aligned_*
  • stat_rx_status_*
  • tx_ptp_pcslane_out_*
  • rx_lane_aligner_fill_0_*
  • rx_lane_aligner_fill_1_*
  • rx_lane_aligner_fill_2_*
  • rx_lane_aligner_fill_3_*
  • ctl_lt_pseudo_seed1_*
  • ctl_lt_k_p1_to_tx1_*
  • ctl_lt_k0_to_tx1_*
  • ctl_lt_stat_p1_to_tx1_*
  • ctl_lt_stat0_to_tx1_*
  • ctl_lt_stat_m1_to_tx1_*
  • ctl_lt_pseudo_seed2_*
  • ctl_lt_k_p1_to_tx2_*
  • ctl_lt_k0_to_tx2_*
  • ctl_lt_k_m1_to_tx2_*
  • ctl_lt_k_m1_to_tx2_*
  • ctl_lt_stat0_to_tx2_*
  • ctl_lt_stat_m1_to_tx2_*
  • ctl_lt_pseudo_seed3_*
  • ctl_lt_k_p1_to_tx3_*
  • ctl_lt_k0_to_tx3_*
  • ctl_lt_k_m1_to_tx3_*
  • ctl_lt_stat_p1_to_tx3_*
  • Ctl_lt_stat0_to_tx3_*
  • ctl_lt_stat_m1_to_tx3_*
  • stat_an_start_tx_disable_*
  • stat_an_start_an_good_check_*
  • stat_lt_k_p1_from_rx1_*
  • stat_lt_k0_from_rx1_*
  • stat_lt_k_m1_from_rx1_*
  • stat_lt_stat_p1_from_rx1_*
  • stat_lt_stat0_from_rx1_*
  • stat_lt_stat_m1_from_rx1_*
  • stat_lt_k_p1_from_rx2_*
  • Stat_lt_k0_from_rx2_*
  • stat_lt_k_m1_from_rx2_*
  • stat_lt_stat_p1_from_rx2_*
  • stat_lt_stat0_from_rx2_*
  • stat_lt_stat_m1_from_rx2_*
  • stat_lt_k_p1_from_rx3_*
  • stat_lt_k0_from_rx3_*
  • stat_lt_k_m1_from_rx3_*
  • stat_lt_stat_p1_from_rx3_*
  • stat_lt_stat0_from_rx3_*
  • stat_lt_stat_m1_from_rx3_*