The example design above is generated when the DMA Interface Selection option is set to AXI Stream with Completion in the Basic tab. In this mode, the AXI-ST H2C interface is connected to a data checker, and the AXI-ST C2H interface is connected to data generator and CMPT interface is connected to Completion generator module. The diagram shows AXI4-Lite Master is connected to the 4 KB block RAM and the User Control logic. The software can control data checker and data generator though the AXI4-Lite Master interface. The data generator and checker work only with a predefined pattern, which is a 16-bit incremental pattern starting with 0. This data file is included in the driver package.
The pattern generator and checker can be controlled using the registers found in the Example Design Registers.