Differential SSTL18, SSTL15, SSTL135, SSTL12

UltraScale Architecture SelectIO Resources User Guide (UG571)

Document ID
UG571
Release Date
2023-08-31
Revision
1.15 English

This Figure shows a sample circuit illustrating a termination technique for differential SSTL18, SSTL15, SSTL135, or SSTL12 with unidirectional termination. In a specific circuit, all drivers and receivers must be at the same voltage level (1.8V, 1.5V, 1.35V, or 1.2V); they are not interchangeable (i.e., DIFF_SSTL12 should only interface with DIFF_SSTL12).

Figure 1-67: Differential SSTL18, SSTL15, SSTL135, or SSTL12 Unidirectional Termination

X-Ref Target - Figure 1-67

X16127-diff-sstl18-sstl15-sstl135-or-sstl12-uni-term.jpg

This Figure shows a sample circuit illustrating a termination technique for differential SSTL18, SSTL15, SSTL135, or SSTL12 with unidirectional DCI termination. In a specific circuit, all drivers and receivers must be at the same voltage level (1.8V, 1.5V, 1.35V, or 1.2V); they are not interchangeable (i.e., DIFF_SSTL12_DCI should only interface with DIFF_SSTL12_DCI).

Figure 1-68: Differential SSTL18, SSTL15, SSTL135, or SSTL12 Unidirectional DCI Termination

X-Ref Target - Figure 1-68

X16128-diff-sstl18-sstl15-sstl135-or-sstl12-uni-dci-term.jpg

This Figure shows a sample circuit illustrating a termination technique for differential SSTL18, SSTL15, SSTL135, or SSTL12 with bidirectional termination. In a specific circuit, all drivers and receivers must be at the same voltage level (1.8V, 1.5V, 1.35V, or 1.2V); they are not interchangeable (i.e., DIFF_SSTL12 should only interface with DIFF_SSTL12).

Figure 1-69: Differential SSTL18, SSTL15, SSTL135, or SSTL12 with Bidirectional Termination

X-Ref Target - Figure 1-69

X16129-diff-sstl18-sstl15-sstl135-or-sstl12-w-bidi-term.jpg

This Figure shows a sample circuit illustrating a termination technique for differential SSTL18, SSTL15, SSTL135, or SSTL12 with bidirectional DCI termination. In a specific circuit, all drivers and receivers must be at the same voltage level (1.8V, 1.5V, 1.35V, or 1.2V); they are not interchangeable (i.e., DIFF_SSTL12_DCI should only interface with DIFF_SSTL12_DCI). DCI standards are supported only in HP I/Os.

Figure 1-70: Differential SSTL18, SSTL15, SSTL135, or SSTL12 with Bidirectional DCI Termination

X-Ref Target - Figure 1-70

X16130-diff-sstl18-sstl15-sstl135-or-sstl12-w-bidi-dci-term.jpg

Table: SSTL Allowed Attributes lists the allowed attributes for SSTL I/O standards. Support is implied for primitives that are derivatives of the primitives listed in Table: SSTL Allowed Attributes (for example: *_DIFF_OUT, *_DCIEN, *_IBUFDISABLE, or *_INTERMDISABLE). Refer to the SelectIO Interface Primitives section for all supported derivatives.

Table 1-44: SSTL Allowed Attributes

Attributes

IBUF/IBUFE3/IBUFDS/IBUFDSE3

OBUF/OBUFT

IOBUF/IOBUFE3/IOBUFDS/IOBUFDSE3

HP I/O

HR I/O

HP I/O

HR I/O

HP I/O

HR I/O

Allowed Values

Default

Allowed Values

Default

Allowed Values

Default

Allowed Values

Default

Allowed Values

Default

Allowed Values

Default

IOSTANDARD

SSTL12
SSTL135
SSTL15
SSTL18_I

SSTL12
SSTL135
SSTL135_R
SSTL15
SSTL15_R
SSTL18_I

SSTL12
SSTL135
SSTL15
SSTL18_I

SSTL12
SSTL135
SSTL135_R
SSTL15
SSTL15_R
SSTL18_I

SSTL12
SSTL135
SSTL15
SSTL18_I

SSTL12
SSTL135
SSTL135_R
SSTL15
SSTL15_R
SSTL18_I

SLEW

N/A

N/A

FAST, MEDIUM, SLOW

SLOW

FAST SLOW

SLOW

FAST, MEDIUM, SLOW

SLOW

FAST SLOW

SLOW

ODT

RTT_40
RTT_48
RTT_60
RTT_NONE

RTT_NONE

RTT_40
RTT_48
RTT_60
RTT_NONE

RTT_NONE

N/A

N/A

RTT_40
RTT_48
RTT_60
RTT_NONE
(1)

RTT_NONE

RTT_40
RTT_48
RTT_60
RTT_NONE

RTT_NONE

OUTPUT_
IMPEDANCE

N/A

N/A

RDRV_40_40
RDRV_48_48
RDRV_60_60

RDRV_40_40

N/A

RDRV_40_40
RDRV_48_48
RDRV_60_60
(1)

RDRV_40_40

N/A

IOSTANDARD

SSTL12_DCI
SSTL135_DCI
SSTL15_DCI
SSTL18_I_DCI

N/A

SSTL12_DCI
SSTL135_DCI
SSTL15_DCI
SSTL18_I_DCI

N/A

SSTL12_DCI
SSTL135_DCI
SSTL15_DCI
SSTL18_I_DCI

N/A

SLEW

N/A

N/A

FAST, MEDIUM, SLOW

SLOW

N/A

FAST, MEDIUM, SLOW

SLOW

N/A

ODT

RTT_40
RTT_48
RTT_60

RTT_40

N/A

N/A

N/A

RTT_40
RTT_48 RTT_60
(1) (3)

RTT_40

N/A

OUTPUT_
IMPEDANCE

N/A

N/A

RDRV_40_40
RDRV_48_48
RDRV_60_60

RDRV_40_40

N/A

RDRV_40_40
RDRV_48_48
RDRV_60_60
(1)

RDRV_40_40

N/A

IOSTANDARD

DIFF_SSTL12 DIFF_SSTL135 DIFF_SSTL15 DIFF_SSTL18_I

DIFF_SSTL12 DIFF_SSTL135 DIFF_SSTL15 DIFF_SSTL18_I

DIFF_SSTL12
DIFF_SSTL135
DIFF_SSTL15
DIFF_SSTL18_I

DIFF_SSTL12 DIFF_SSTL135 DIFF_SSTL15 DIFF_SSTL18_I

DIFF_SSTL12
DIFF_SSTL135
DIFF_SSTL15
DIFF_SSTL18_I

DIFF_SSTL12 DIFF_SSTL135 DIFF_SSTL15 DIFF_SSTL18_I

SLEW

N/A

N/A

FAST
MEDIUM
SLOW

SLOW

FAST SLOW

SLOW

FAST
MEDIUM
SLOW

SLOW

FAST
SLOW

SLOW

DQS_BIAS (2)

TRUE
FALSE

FALSE

TRUE
FALSE

FALSE

N/A

N/A

TRUE
FALSE

FALSE

TRUE FALSE

FALSE

ODT

RTT_40
RTT_48
RTT_60
RTT_NONE

RTT_NONE

RTT_40
RTT_48
RTT_60
RTT_NONE

RTT_NONE

N/A

N/A

RTT_40
RTT_48
RTT_60
RTT_NONE
(1)

RTT_NONE

RTT_40
RTT_48
RTT_60
RTT_NONE

RTT_NONE

OUTPUT_
IMPEDANCE

N/A

N/A

RDRV_40_40
RDRV_48_48
RDRV_60_60

RDRV_40_40

N/A

RDRV_40_40
RDRV_48_48
RDRV_60_60
(1)

RDRV_40_40

N/A

IOSTANDARD

DIFF_SSTL12_DCI
DIFF_SSTL135_DCI
DIFF_SSTL15_DCI
DIFF_SSTL18_I_DCI

N/A

DIFF_SSTL12_DCI
DIFF_SSTL135_DCI
DIFF_SSTL15_DCI
DIFF_SSTL18_I_DCI

N/A

DIFF_SSTL12_DCI
DIFF_SSTL135_DCI
DIFF_SSTL15_DCI
DIFF_SSTL18_I_DCI

N/A

SLEW

N/A

N/A

FAST
MEDIUM
SLOW

SLOW

N/A

FAST
MEDIUM
SLOW

SLOW

N/A

DQS_BIAS (2) (4)

TRUE
FALSE

FALSE

N/A

N/A

N/A

TRUE
FALSE

FALSE

N/A

ODT

RTT_40
RTT_48 RTT_60
(3)

RTT_40

N/A

N/A

N/A

RTT_40
RTT_48 RTT_60
(1) (3)

RTT_40

N/A

OUTPUT_
IMPEDANCE

N/A

N/A

RDRV_40_40
RDRV_48_48
RDRV_60_60

RDRV_40_40

N/A

RDRV_40_40
RDRV_48_48
RDRV_60_60
(1)

RDRV_40_40

N/A

IOSTANDARD

N/A

DIFF_SSTL135_R
DIFF_SSTL15_R

N/A

DIFF_SSTL135_R
DIFF_SSTL15_R

N/A

DIFF_SSTL135_R
DIFF_SSTL15_R

SLEW

N/A

N/A

N/A

FAST
SLOW

SLOW

N/A

FAST
SLOW

SLOW

ODT

N/A

RTT_40
RTT_48
RTT_60
RTT_NONE

RTT_NONE

N/A

N/A

N/A

RTT_40
RTT_48
RTT_60
RTT_NONE

RTT_NONE

Notes:

1. The allowed bidirectional configuration combinations for driver output impedance (OUTPUT_IMPEDANCE) and ODT are listed in Table: Only Allowed Combinations for Bidirectional Configurations .

2. The DQS_BIAS attribute is set on the I/O port rather than the primitive.

3. ODT = RTT_NONE is not a valid setting for DCI I/O standards.

4. This is read-only on the primitive.

Table: SSTL Class II Allowed Attributes lists the allowed attributes for SSTL Class II I/O standards. Support is implied for primitives that are derivatives of the primitives listed in Table: SSTL Class II Allowed Attributes (for example: *_DIFF_OUT, *_DCIEN, *_IBUFDISABLE, or *_INTERMDISABLE). Refer to the SelectIO Interface Primitives section for all supported derivatives.

Table 1-45: SSTL Class II Allowed Attributes

Attributes

IBUF/IBUFDS

OBUF/OBUFT

IOBUF/IOBUFDS

HP I/O

HR I/O

HP I/O

HR I/O

HP I/O

HR I/O

Allowed Values

Default

Allowed Values

Default

Allowed Values

Default

IOSTANDARD

N/A

SSTL18_II DIFF_SSTL18_II

N/A

SSTL18_II DIFF_SSTL18_II

N/A

SSTL18_II
DIFF_SSTL18_II

SLEW

N/A

N/A

N/A

FAST
SLOW

SLOW

N/A

FAST
SLOW

SLOW

ODT

N/A

RTT_40
RTT_48
RTT_60
RTT_NONE

RTT_NONE

N/A

N/A

N/A

RTT_40
RTT_48
RTT_60
RTT_NONE

RTT_NONE