The following table shows the revision history for this document.
|
Date |
Version |
Description of Revisions |
|---|---|---|
|
10/22/2021 |
7.0 |
• Added support for Zynq UltraScale+ RFSoC DFE devices to use DFE_CFR Primitives. • Updated Features section. • Deprecated support for Data_Rate = 8 case when using PL CFR. |
|
01/08/2021 |
6.4 |
Extended the LUT optimization features available for CPS=2 in PC-CFR v6.3 to all CPS cases. These optimizations must be seen in all smart peak processing cases. |
|
05/22/2019 |
6.3 |
Enabled LUT optimization for SPP and Data Rate (clock-cycles/samples) = 2 scenarios at the cost of 3 DSP48s increase per iteration. |
|
12/05/2018 |
6.2 |
Updated the Features section with a description of Dynamic mode. |
|
06/20/2018 |
6.2 |
• Added 16 antenna support. • DSP48 optimization in CPGs. • Core is fully supported in Vivado 2018.2. |
|
10/05/2016 |
6.1 |
• Added support to work as Stand-alone Hard Clipper. • Added optional feature to operate WCFR without smart peak processing. • Added TUSER forwarding feature. • Added Support for two more RATs (RATD and RATE) in dynamic CP computation mode. |
|
11/18/2015 |
6.0 |
Added support for UltraScale+ families. |
|
04/01/2015 |
6.0 |
Production release of PC-CFR v6.0 core. |
|
10/01/2014 |
6.0 |
• Version 6.0 is Early Access, Lounge delivered to customers. • Added UltraScale Architecture support. • Updated Features. • Removed resource table and replaced with link to product page. |
|
12/18/2013 |
5.0 |
• Revision number advanced to 5.0 to align with core version number. • Added dynamic support (dynamic power variation and frequency hopping) • Hard clipper support • Change in tool settings for characterization • New TUSER port added in Dynamic mode |
|
03/20/2013 |
3.0 |
PC-CFR v4.0 is available only with Vivado; other changes are • Improved f max , core can be clocked at 491.52 MHz for -2 devices • Core latency has changed |
|
12/18/2012 |
2.0 |
Updated for 2012.4/14.4. • Real/Complex CP selection added • Number of CPGs/iteration increased to 12 • Core is fully supported in Vivado 2012.4 • Peak detect window is used in place of allocator spacing |
|
06/22/2011 |
1.0 |
Initial Xilinx release. Previous version of this Product Brief is XMP039. |