PMC MIO[46:47] I2C0 Bus

[Figure 1, callout 12]

Bus I2C0 connects the XCVP1202 U1 PS bank 501 and the XCZU4EG system controller U125 PS bank 501 to a GPIO 16-bit port expander (TCA6416A U233) and I2C switch (TCA9548A U33). The port expander enables accepting various fan controller, FMCP connector, and power system status inputs. Bus I2C0 also provides access to power system PMBus power controllers and INA226 power monitors, as well as three SI570 components via the U33 TCA9548A switch. TCA6416A U233 is pin-strapped to respond to I2C address 0x20. The TCA9548A U33 switch is set to 0x74. Details for controlling the U33 TCA9548A switch can be located in the data sheet located on the Texas Instruments website.

The detailed ACAP connections for the feature described in this section are documented in the VPK120 board XDC file, referenced in Xilinx Design Constraints.

The following figure shows the I2C0 bus connectivity.

The devices on each port of the I2C0 U233 TCA6416A port expander and on each bus of the I2C0 U33 TCA9548A switch are listed in the following tables.