EQ_COMPARE_MACRO - 2022.1 English

Vivado Design Suite 7 Series FPGA and Zynq-7000 SoC Libraries Guide (UG953)

Document ID
UG953
Release Date
2022-04-20
Version
2022.1 English

Macro: Equality Comparator

Introduction

EQ_COMPARE_MACRO simplifies the instantiation of the DSP48 block when used as an equality comparator. It features parameterizable input and output widths, latencies, mask, and input sources that ease the integration of the DSP48 block into HDL.

Port Descriptions

Port Direction Width Function
Q Output 1 Active-High pattern detection. Detects match of DATA_IN and the selected DYNAMIC_PATTERN gated by the MASK. Result arrives on the same cycle as P.
DATA_IN Input Variable width, equals the value of the WIDTH attribute. Input data to be compared.
DYNAMIC_PATTERN Input Variable width, equals the value of the WIDTH attribute. Dynamic data to be compared to DATA_IN.
CLK Input 1 Clock.
CE Input 1 Clock enable.
RST Input 1 Synchronous Reset.

Design Entry Method

This unimacro is a parameterizable version of the primitive, and can be instantiated only.
Instantiation Yes
Inference No
IP Catalog No
Macro support Recommended

Available Attributes

Attribute Type Allowed Values Default Description
DEVICE STRING "7SERIES" "7SERIES" Target hardware architecture.
SEL_PATTERN INTEGER 1 to 24 24 Controls the width of PREADD1 and PREADD2 inputs.
MASK HEX 48 hex all zeros Mask to be used for pattern detector.
STATIC_PATTERN HEX 48 hex all zeros Pattern to be used for pattern detector.
SEL_MASK STRING "MASK", "DYNAMIC_PATTERN" "MASK" Selects whether to use the static MASK or the C input for the mask of the pattern detector.
WIDTH INTEGER 1 to 48 48 Width of DATA_IN and DYNAMIC_PATTERN.
LATENCY INTEGER 0, 1, 2, 3 2 Number of pipeline registers.
  • 1: QREG == 1
  • 2: AREG == BREG == CREG == QREG == 1
  • 3: AREG == BREG == 2 and CREG == QREG == 1

VHDL Instantiation Template

Unless they already exist, copy the following four statements and paste them before the entity declaration.
Library UNISIM;
use UNISIM.vcomponents.all;
library UNIMACRO;
use unimacro.Vcomponents.all;

-- EQ_COMPARE_MACRO: Equiality Comparator implemented in a DSP48E
--                   7 Series
-- Xilinx HDL Language Template, version 2022.1

EQ_COMPARE_MACRO_inst : EQ_COMPARE_MACRO
generic map (
   DEVICE => "7SERIES",         -- Target Device: "VIRTEX5", "7SERIES"
   LATENCY => 2,                -- Desired clock cycle latency, 0-2
   MASK => X"000000000000",     -- Select bits to be masked, must set
                                -- SEL_MASK = "MASK"
   SEL_MASK => "MASK",          -- "MASK" = use MASK generic,
                                -- "DYNAMIC_PATTERN = use DYNAMIC_PATTERN input bus
   SEL_PATTERN => "DYNAMIC_PATTERN", -- "DYNAMIC_PATTERN" = use DYNAMIC_PATTERN input bus
                                     -- "STATIC_PATTERN" = use STATIC_PATTERN generic
   STATIC_PATTERN => X"000000000000", -- Specify static pattern,
                                      -- must set SEL_PATTERN = "STATIC_PATTERN
   WIDTH => 48)            -- Comparator output bus width, 1-48
port map (
   Q => Q,        -- 1-bit output indicating a match
   CE => CE,      -- 1-bit active high input clock enable input
   CLK => CLK,    -- 1-bit positive edge clock input
   DATA_IN => DATA_IN, -- Input Data Bus, width determined by WIDTH generic
   DYNAMIC_PATTERN, => DYNAMIC_PATTERN, -- Input Dynamic Match/Mask Bus, width determined by WIDTH generic
   RST => RST       -- 1-bit input active high reset
);
-- End of EQ_COMPARE_MACRO_inst instantiation

Verilog Instantiation Template


// EQ_COMPARE_MACRO: Equality Comparator implemented in a DSP48E
//                   7 Series
// Xilinx HDL Language Template, version 2022.1

EQ_COMPARE_MACRO #(
   .DEVICE("7SERIES"),       // Target Device: "7SERIES"
   .LATENCY(2),              // Desired clock cycle latency, 0-2
   .MASK(48'h000000000000),  // Select bits to be masked, must set SEL_MASK="MASK"
   .SEL_MASK("MASK"),        // "MASK" = use MASK parameter,
                             //   "DYNAMIC_PATTERN" = use DYNAMIC_PATTERN input bus
   .SEL_PATTERN("STATIC_PATTERN"), // "STATIC_PATTERN" = use STATIC_PATTERN parameter,
                                   //   "DYNAMIC_PATTERN = use DYNAMIC_PATTERN input bus
   .STATIC_PATTERN(48'h000000000000), // Specify static pattern, must set SEL_PATTERN = "STATIC_PATTERN"
   .WIDTH(48)                // Comparator output bus width, 1-48
) EQ_COMPARE_MACRO_inst (
   .Q(Q),     // 1-bit output indicating a match
   .CE(CE),   // 1-bit active high input clock enable
   .CLK(CLK), // 1-bit positive edge clock input
   .DATA_IN(DATA_IN), // Input Data Bus, width determined by WIDTH parameter
   .DYNAMIC_PATTERN(DYNAMIC_PATTERN), // Input Dynamic Match/Mask Bus, width determined by WIDTH parameter
   .RST(RST)  // 1-bit input active high reset
);

// End of EQ_COMPARE_MACRO_inst instantiation