OBUFTDS - 2022.1 English

Vivado Design Suite 7 Series FPGA and Zynq-7000 SoC Libraries Guide (UG953)

Document ID
UG953
Release Date
2022-04-20
Version
2022.1 English

Primitive: 3-State Output Buffer with Differential Signaling, Active-Low Output Enable

Introduction

This design element is an output buffer that supports low-voltage, differential signaling. For the OBUFTDS, a design level interface signal is represented as two distinct ports (O and OB), one deemed the "master" and the other the "slave." The master and the slave are opposite phases of the same logical signal (for example, MYNET_P and MYNET_N).

Logic Table

Inputs Outputs
I T O OB
X 1 Z Z
0 0 0 1
1 0 1 0

Port Descriptions

Port Direction Width Function
O Output 1 Diff_p output (connect directly to top level port).
OB Output 1 Diff_n output (connect directly to top level port).
I Input 1 Buffer input.
T Input 1 3-state enable input.

Design Entry Method

Instantiation Recommended
Inference No
IP Catalog No
Macro support No

Available Attributes

Attribute Type Allowed Values Default Description
IOSTANDARD STRING See Data Sheet "DEFAULT" Assigns an I/O standard to the element.
SLEW STRING "SLOW" or "FAST" "SLOW" Specifies the slew rate of the output driver. Consult the product Data Sheet for recommendations of the best setting for this attribute.

VHDL Instantiation Template

Unless they already exist, copy the following two statements and paste them before the entity declaration.
Library UNISIM;
use UNISIM.vcomponents.all;

-- OBUFTDS: Differential 3-state Output Buffer
--          7 Series
-- Xilinx HDL Language Template, version 2022.1

OBUFTDS_inst : OBUFTDS
generic map (
   IOSTANDARD => "DEFAULT")
port map (
   O => O,     -- Diff_p output (connect directly to top-level port)
   OB => OB,   -- Diff_n output (connect directly to top-level port)
   I => I,     -- Buffer input
   T => T      -- 3-state enable input
);

-- End of OBUFTDS_inst instantiation

Verilog Instantiation Template


// OBUFTDS: Differential 3-state Output Buffer
//          7 Series
// Xilinx HDL Language Template, version 2022.1

OBUFTDS #(
   .IOSTANDARD("DEFAULT"), // Specify the output I/O standard
   .SLEW("SLOW")           // Specify the output slew rate
) OBUFTDS_inst (
   .O(O),     // Diff_p output (connect directly to top-level port)
   .OB(OB),   // Diff_n output (connect directly to top-level port)
   .I(I),     // Buffer input
   .T(T)      // 3-state enable input
);

// End of OBUFTDS_inst instantiation

Related Information

  • See the 7 Series FPGA SelectIO Resources User Guide (UG471).