SDI_TS_DET_OUT Interface Ports - 2.0 English

SDI_TS_DET_OUT_ rx_t_locked

O

This output is High when the transport detection function in the receiver has identified the transport format of the SDI signal (that is, transport locked)

SDI_TS_DET_OUT_ rx_t_family[3:0]

O

This output indicates which family of video signals is being used as the transport of the SDI. This output is only valid when rx_t_locked is High. This port does not necessarily identify the video format of the picture being transported. It only identifies the transport characteristics.

SDI_TS_DET_OUT_ rx_t_rate[3:0]

O

This output indicates the frame rate of the transport. This is not necessarily the same as the frame rate of the actual picture. This output is only valid when rx_t_locked is High.

SDI_TS_DET_OUT_ rx_t_scan

O

This output indicates whether the transport is interlaced (Low) or progressive (High). This is not necessarily the same as the scan mode of the actual picture. This output is only valid when rx_t_locked is High.

Notes:

1. See Transport Format Detection for more detailed signal descriptions.