This block is listed in the following Xilinx® Blockset libraries: Basic Elements, Control Logic, Memory, Floating-Point, and Index.
The Xilinx Register block models a D flip-flop-based register, having latency of one sample period.
Block Interface
The block has one input port for the data and an optional input reset port. The initial output value is specified by you in the block parameters dialog box (below). Data presented at the input will appear at the output after one sample period. Upon reset, the register assumes the initial value specified in the parameters dialog box.
The Register block differs from the Xilinx Delay block by providing an optional reset port and a user specifiable initial value.
Block Parameters
The block parameters dialog box can be invoked by double-clicking the icon in your Simulink® model.
- Basic tab
-
Parameters specific to the Basic tab are as follows.
- Initial value
- specifies the initial value in the register.
- Optional Ports
-
Other parameters used by this block are explained in the topic Common Options in Block Parameter Dialog Boxes.
Xilinx LogiCORE
The Register block is implemented as a synthesizable VHDL module. It does not use a Xilinx LogiCORE™ ™.