The General Configuration tab configures the Integrated 100G Ethernet core features. See This Figure.
Table: General Tab describes the General tab options.
Parameter |
Description |
Default Value |
Range |
---|---|---|---|
Physical Layer |
|||
Mode |
100G Ethernet Mode |
CAUI 10 |
CAUI 10 CAUI 4 100GAUI 2 100GAUI 4 Runtime Switchable |
Line Rate |
Number of lanes and line rate |
10 lanes x 10.3125 Gb/s |
10 lanes x 10.3125 Gb/s 4 lanes x 25.7812 Gb/s 2 lanes x 53.125 Gb/s 4 lanes x 26.5625 Gb/s |
Transceiver Type(1) |
Transceiver Type |
GTY |
GTH GTY GTM |
GT RefClk |
Reference clock for the GTs used |
156.25 MHz |
103.12 MHz 128.90 MHz 156.25 MHz 161.13 MHz 195.31 MHz 201.41 MHz 206.25 MHz 257.81 MHz 309.37 MHz 312.50 MHz 322.266 MHz |
Operation |
Operating mode |
Duplex |
Simplex TX Simplex RX Duplex |
Clocking |
Clocking mode |
Asynchronous |
Asynchronous |
User Interface |
User Interface |
LBUS |
LBUS AXIS |
GT DRP/Init Clock |
This specifies the frequency (in MHz) that is used to provide a free running clock to GT and also for the DRP operations |
100.00 |
50 to 250 MHz |
Enable TX OTN Interface |
Selecting this option will include TX Optical Transport Network (OTN) RTL Interface. Note: This feature is available in CAUI-10 and CAUI-4 mode. |
0 |
0: Disabled 1: Enabled |
Link Layer – Transmit |
|||
TX Frame CRC(2) |
TX Frame CRC checking |
Enable FCS insertion |
Enable FCS Insertion Disable FCS Insertion |
Enable TX Lane0 VLM BIP7 Override Port (2) |
TX Lane0 VLM BIP7 Override |
0 |
0: Disabled 1: Enabled |
Link Layer – Receive |
|||
RX Frame CRC(3) |
RX Frame CRC checking |
Enable FCS stripping |
Enable FCS stripping Disable FCS stripping |
Max Pkt Len(3) |
Maximum Packet Length |
9,600 |
64 to 16383 |
Min Pkt Len(3) |
Minimum Packet Length |
64 |
64 to 255 |
Check Preamble(3) |
Check Preamble |
0 |
0: Disabled 1: Enabled |
Check SFD(3) |
Check SFD |
0 |
0: Disabled 1: Enabled |
Process LFI(3) |
RX Process LFI |
0 |
0: Disabled 1: Enabled |
Link Layer – Flow Control |
|||
Enable Transmit Flow Control |
Enable Transmit Flow Control |
1 |
0: Disabled 1: Enabled |
Enable Receive Flow Control |
Enable Receive Flow Control |
1 |
0: Disabled 1: Enabled |
Enable RX Forward Control Frames(4) |
Forward Control Frames |
0 |
0: Disabled 1: Enabled |
Enable Receive Check ACK |
Enable Receive Check ACK |
1 |
0: Disabled 1: Enabled |
Link Layer – IEEE PTP 1588v2 |
|||
Enable Time Stamping |
Enables timestamping |
0 |
0: Disabled 1: Enabled |
Operation Mode |
Select the Operation Mode. Unavailable when Enable Time Stamping = 0 |
Two Step |
One Step Two Step Both |
Clocking Mode |
Select the Clocking Mode. Unavailable when Enable Time Stamping = 0 |
Ordinary Clock |
Ordinary Clock Transparent Clock |
TX Latency Adjust 1-step with 2-step |
Unavailable when Enable Time Stamping = 0 with default value as 0. Only available when Operation Mode is Both. If the clocking mode is ordinary clock, default value is 705. If clocking mode is transparent clock, default value should be 802. |
0 |
0 to 2,047 |
Enable VLane Adjust Mode |
Unavailable when Enable Time Stamping = 0. Available when operation mode is |
0 |
0: Disabled 1: Enabled |
Link Layer – TX Interpacket Gap |
|||
TX IPG Value |
TX Interpacket Gap Value |
12 |
8 to 12 (integer) |
Additional Features |
|||
Include IEEE 802.3bj RS-FEC(5) |
Selecting this option will include IEEE 802.3bj RS-FEC in between CMAC and GT. For 100GAUI-2 mode, the KP4 FEC Transcode within the GTM is enabled and grayed out. Note: This feature is available in 100GAUI-2, CAUI-4, and Runtime Switchable mode. |
0 |
0: Disabled 1: Enabled |
Include AN/LT Logic |
Selecting this option will include AN/LT soft logic. Note: This feature is available in CAUI-4 mode only. |
0 |
0: Disabled 1: Enabled |
Include AXI4-Lite Control and Statistics Interface |
When you enable, the AXI4-Lite interface is provided in the core. |
0 |
0: Disabled 1: Enabled |
Include Statistics Counters |
Selecting this option will include the statistics counters in the AXI4-Lite registers. Note: This feature is enabled when Include AXI4-Lite Control and Statistics Interface is selected. |
0 |
0: Disabled 1: Enabled |
Statistics Resource Type |
This option indicates the type of implementation of the statistics counters. Note: This feature is enabled when Include AXI4-Lite Control and Statistics Interface and Include Statistics Counters are selected. |
Registers |
Registers Block RAM(6) |
Notes: 1.Transceivers are selected as per the availability based on the devices. 2.Requires TX to be enabled. Operation = Simplex TX or Duplex modes only. 3.Requires RX to be enabled. Operation = Simplex RX or Duplex modes only. 4.Option is disabled when receive flow control is disabled. 5.For 100GAUI-2 mode, it is “Include KP4 FEC Transcode” configuration. In this case, the KP4 FEC Transcode within the GTM is used. 6.Block RAM usage for the Statistics counters will be supported in a future release. |