The RS-FEC Transcode Bypass tab is shown in This Figure and is described in Table: RS-FEC Transcode Bypass Tab.
Figure 4-4: RS-FEC Transcode Bypass Tab
X-Ref Target - Figure 4-4
|
Table 4-4: RS-FEC Transcode Bypass Tab
Parameter
|
Description
|
Default Value
|
Range
|
RS-FEC Transcode Bypass
|
Enable RS-FEC Transcode Bypass
|
Selects between RS-Encoder/Decoder only and the full 802.3bj RS-FEC sublayer, including transcoding.
|
0
|
0: Disable
1: Enable
|
CMAC Core Selection
|
Select 100G Ethernet Hard IP core location with RSFEC.
|
Based on the FPGA and part number
|
Based on the FPGA and part number
|
Notes:
1.If Enable RS-FEC Transcode Bypass mode is set to Enable, the CMAC Core and GT functionalities are not be available; hence all the other tab options will be disabled.
|