File Menu Options

RF Data Converter Interface User Guide (UG1309)

Document ID
UG1309
Release Date
2021-10-27
Revision
1.4 English
File > Load/Save configuration
Configuration covers all the displayed settings of the Zynq® UltraScale+™ RFSoC such as, real or I/Q mode, mixer settings, and enable or bypass internal PLL. All these settings can be saved and restored. This feature enables quick configuration as well as configurations that can be shared with others. Configuration files are located in the \Config\ directory by default, with the file extension of .cfg.
File > Load/Save preferences
Preferences are the user-defined settings of the GUI. It includes tabs used for data generation, data capture, and user options in the GUI that are not linked to the device under test (DUT) configuration such as, mapping in the MultiView mode, number of samples, and tone frequency. You can save the preferred settings of GUI or restore any of them. Preferences files are located in the \Config\ directory by default, with the file extension of .prf.
File > Hardware target
RF Analyzer only. Opens the bitstream download screen.
File > Export ADC Data
This command exports the RF-ADC data captured of all the opened RF-ADC channels with LVM or TDMS file format (chosen in Settings > Data File Format). The default directory is \Data\ADC\.
File > Exit
Exit the software.