Add the DPUCZDX8G into Repository or Upgrade the DPUCZDX8G from a Previous Version - 3.4 English

DPUCZDX8G for Zynq UltraScale+ MPSoCs Product Guide (PG338)

Document ID
PG338
Release Date
2022-01-20
Version
3.4 English

In the Vivado Integrated Design Environment (IDE), click Project Manager > IP Catalog. In the IP catalog tab, right-click and select Add Repository (see figure below), then select the location of the DPUCZDX8G IP.

Figure 1. Add Repository

The DPUCZDX8G IP will appear in the IP catalog page.

Figure 2. DPUCZDX8G IP in Repository

If there is an existing hardware project with an old version of the DPUCZDX8G, upgrading to the latest version is required, follow these steps:

  1. Delete the old DPUCZDX8G IP in the block design and IP repository.
  2. Add the new DPUCZDX8G IP into the IP repository.
  3. Add the new DPUCZDX8G IP into the block design.